Multi-Wire Lugs

Four (4) or more wire/barrel electrical lugs. UL, UR, and CSA listings

(see each part for individual certs).

Tip: Parts listed in order of increasing Wire Size

Search by Wire Size

10 AWG | 6 AWG |4 AWG | 2 AWG | 1/0 AWG | 2/0 AWG

250 kcmil | 350 kcmil | Standoff Kits

Six Wire Application

Dual Interlocking Lugs/

Seven Wire Application

S2-NB-2 and 3S4-3-21-28-HEX

Dimensions

A: 2.44" (62.0mm)

B: 1.63" (41.4mm)

C: 0.41" (10.3mm)

L: 0.50" (12.7mm)

See Mechanical Drawing for detailed dimensions

Per Wire in Power Distribution or Collection Mode:

85 Amp 75C Cu wire
65 Amp 75C Al Wire

12 Wire Application

Dimensions

A: 2.44" (62.0mm)

B: 1.63" (41.4mm)

C: 0.75" (19.1mm)

L: 0.50" (12.7mm)

See Mechanical Drawing for detailed dimensions

Per Wire in Power Distribution or Collection Mode:

85 Amp 75C Cu wire
95Amp 95C Cu wire 
65 Amp 75C Al Wire
75 Amp 90C Al Wire

Approved for three and four wire applications. (Two #10, #12, or #14 wires acceptable. No mixing.)

Dimensions

A: 1.21" 30.7mm)

B: 0.56" (14.2mm)

C: 0.46" (11.7mm)

See Mechanical Drawing for detailed dimensions

"P2" 2 AWG splicer reducer wire lug, 2-14 AWG wire range, and FLEX, 4-12 AWG, 25mm2-4mm2, wire class G-K including mm2 class 5, singles, and multiples of wires: 2x #10, 2x #12 or 2x #14 wires, aluminum or copper wire, splicer or reducer CU7AL, 75C temperature rating, single #10 bolt cl/earance mounting hole or wire insertion "sight" hole, or wire stop hole, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application. IHI® brand. Made in the USA from domestic and imported parts.

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

**TORK KRIMP® Method for clamping wires using uncrimped ferrules is protected under Patent No. 10630005. Full instructions for self crimping ferrules here.

E129884 UL486A,B,
ZMVV

MULTIPLES: 
(2) #10 AWG or
(2) #12 AWG or
(2) #14 AWG

with mounting or
"view" hole

Approved for three and four wire applications. (Two #10, #12, or #14 wires acceptable. No mixing.)

Dimensions

A: 1.21" 30.7mm)

B: 0.56" (14.2mm)

C: 0.46" (11.7mm)

See Mechanical Drawing for detailed dimensions

"P2-HEX" 2 AWG splicer reducer wire lug, 2-14 AWG wire range and FLEX, 4-12 AWG, 25mm2-4mm2, wire class G-K including mm2 class 5,singles, and multiples of wires: 2x #10, 2x #12 or 2x #14 wires, aluminum or copper wire, splicer or reducer CU7AL, 75C temperature rating, single #10 bolt cl/earance mounting hole or wire insertion "sight" hole, or wire stop hole, 1/8" Hex socket screw. Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application. IHI® brand. Made in the USA from domestic and imported parts.

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

**TORK KRIMP® Method for clamping wires using uncrimped ferrules is protected under Patent No. 10630005. Full instructions for self crimping ferrules here.

E129884 UL486A,B,
ZMVV

MULTIPLES: 
(2) #10 AWG or
(2) #12 AWG or
(2) #14 AWG

with mounting or
"view" hole

Assembly PDF

Dual/Interlocking Lugs

7-9 Wire Application

2S1/0-HEX

and 3S6-2S4-HEX

Hardware not included.

Lugs sold individually.

Dimensions

A: 1.62" (41.1mm)

B: 0.75" (19.1mm)

C: 1.38" (35.1mm)

See Mechanical Drawing for detailed dimensions

"3S6-2S4-HEX" 6 AWG lug, five 5 barrel /wires (3) 6-14AWG plus (2) 4-14AWG wire range, Grounding or Power Distribution or Power Collection Lug. Stacker type, two tier lug. UL Listed for General Use including grounding in dry locations. Up to Five wires (5 conductors) aluminum or copper wire, CU9AL, 90C temperature rating, one (1) 1/4" Bolt mounting hole , Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, CSA Certified. Stacking, nesting, and interlocking lugs permitted under UL White book ZMVV. IHI® brand. Made in the USA from domestic and imported parts. Total current rating with 5 full size copper wires 365 Amp. 

	DIY Mounting Holes™: Cat. No. S6-4 Style No. ALL
CSA and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the 3S6-2S4-HEX Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

Assembly PDF

Dual/Interlocking Lugs

7-9 Wire Application

2S1/0-HEX

and 3S6-2S4-HEX

Dimensions

A: 1.62" (41.1mm)

B: 0.75" (19.1mm)

C: 1.38" (35.1mm)

See Mechanical Drawing for detailed dimensions

Note!!!   This part has a 3mm hex socket for use in metric countries.

"3S6-2S4-HEX-M" 6 AWG metric lug, five 5 barrel /wires (3) 6-14AWG plus (2) 4-14AWG wire range, Grounding or Power Distribution or Power Collection Lug. Stacker type, two tier lug. UL Listed for General Use including grounding in dry locations. Up to Five wires (5 conductors) aluminum or copper wire, CU9AL, 90C temperature rating, one (1) 1/4" Bolt mounting hole , Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, CSA Certified. Stacking, nesting, and interlocking lugs permitted under UL White book ZMVV. IHI® brand. Made in the USA from domestic and imported parts. Total current rating with 5 full size copper wires 365 Amp. 5 Metric (3mm) Hex socket screws.

	DIY Mounting Holes™: Cat. No. S6-4 Style No. ALL
CSA and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the 3S6-2S4-HEX-M Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

OEM UL Recognized -
Not Listed

Dimensions

A: 1.81" (46.0mm)

B: 0.78" (19.8mm)

C: 0.63" (16.0mm)

See Mechanical Drawing for detailed dimensions

"7006" 4 AWG multi wire lug, five 5 barrel /wires (4) 4-14 CU7AL AWG plus (1) 2/0-14 AWG wire range, Grounding or Power Distribution or Power Collection Lug. Stacker type, two tier lug. UL Recognized. Up to Five wires (5 conductors) aluminum or copper wire, CU7AL, 75C temperature rating, one #10 (5mm) Bolt mounting hole, UL Recognized at 600v - acceptable for use through 2000v. IHI® brand. Made in the USA from domestic and imported parts. Total current rating with 5 full size copper wires 175 Amp. 

Dimensions

A: 2.31" (58.7mm)

B: 1.63" (41.4mm)

C: 2.87" (72.9mm)

L: 1.16" (29.5mm)

See Mechanical Drawing for detailed dimensions

24S4-3, 4 AWG Multi-wire hole, Lug Body Only (24) twenty four 4-14 wire holes lug for power distribution, power collection, structure grounding, floating ground or neutral bar applications. FLEX wire, 8-14 AWG, class G-K including mm2 class 5, Stacker type, two tier lug. Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, UL486 ZMVV Listed, UL508A SA1.1 Listed category, and CSA Certified. (2) two mounting bolt holes with clearance for ¼” bolts and threaded for 5/16 UNC bolts. May be bus mounted, bare panel case, or bare chassis mounted or insulated using optional UL508A List SA1.1 category QEUY2 Recognized standoffs for power voltages up to 2000V and floating ground

applications when used in accordance with UL508A and NEC code requirements. Copper and tin plated aluminum high strength alloy. Zinc plated steel slotted screws. 

UL508A Information on Standoff Insulators

Assembly of Stacked Connectors and Standoffs

	DIY Mounting Holes™: Cat. No. S4-3 Style No. ALL
CSA and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the 24S4-3 Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

Dimensions

A: 2.31" (58.7mm)

B: 1.63" (41.4mm)

C: 4.23" (107.4mm)

See Mechanical Drawing for detailed dimensions

36S4-3, 4 AWG Multi-wire hole LUG BODY ONLY (36) thirty six 4-14 wire holes lug for power distribution, power collection, structure grounding, floating ground or neutral bar applications. FLEX wire, 8-14 AWG, class G-K including mm2 class 5, Stacker type, two tier lug. Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, UL486 ZMVV Listed, UL508A SA1.1 Listed category, and CSA Certified. (2) two mounting bolt holes with clearance for ¼” bolts and threaded for 5/16 UNC bolts, SOLD SEPARATELY. May be bus mounted, bare panel case, or bare chassis mounted or insulated using optional UL508A List SA1.1 category QEUY2 Recognized standoffs for power voltages up to 1500V and floating ground applications when used in accordance with UL508A and NEC code requirements.

Copper and tin plated aluminum high strength alloy. Zinc plated steel slotted screws.

UL508A Information on Standoff Insulators

Assembly of Stacked Connectors and Standoffs

	DIY Mounting Holes™: Cat. No. S4-3 Style No. ALL
CSA and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the 36S4-3 Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

Dimensions

A: 1.00" (25.4mm) Across Flats

A: 1.14" (29.0mm) Across Points

B: 1.00" (25.4mm)

See Mechanical Drawing for detailed dimensions (page 20).

Dimensions

A: 1.75" (44.5mm)

B: 1.75" (44.5mm)

See Mechanical Drawing for detailed dimensions (page 21).

Assembly PDF Dual Interlocking Lugs/ Four Wire Application   Hardware not included. Lugs sold individually.

Dimensions

A: 1.16" (29.4mm)

B: 0.56" (14.3mm)

C: 1.00" (25.4mm)

See Mechanical Drawing for detailed dimensions

"2S2" 2 AWG double wire lug, 2-14 AWG wire range and FLEX, 4-12 AWG, 25mm2-4mm2, wire class G-K including mm2 class 5,2 barrel, aluminum or copper wire, CU9AL, 90C temperature rating, single 5/16" (8mm) dia. bolt mounting hole, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, CSA Certified. Made in the USA from domestic and imported parts. Stacking, nesting, and interlocking lugs permitted under UL White book ZMVV.

WIRE CONNECTORS AND SOLDERING LUGS (ZMVV)

INSTALLATION

Wire connectors are intended for use in installations covered by ANSI/NFPA 70, ‘‘National Electrical Code’’ (NEC), and should be installed using the prescribed manufacturer’s installation instructions.

"Stacking of connectors (multiple connectors assembled using a single bolt, nut and washers) may be permitted where mechanical interference is reduced or eliminated with the use of offset tangs, stacking adapters, and the like. The surface contact area of the mounting tang should make completecontact with the mounting surface or the previously stacked connector tang."

Ref. UL White Book ZMVV section

ZMVV UL Whitebook Installation Information

UL & CSA Approved for FLEX wire Class G-K sizes #1/0-#14 AWG
Use of Ferrules (UL Listed) on wires 1/0-14 AWG

Screwdriver Bit Information

	DIY Mounting Holes™: Cat. No. S2 Style No. ALL
CSA and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the 2S2 Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

**TORK KRIMP® Method for clamping wires using uncrimped ferrules is protected under Patent No. 10630005. Full instructions for self crimping ferrules here.

Assembly PDF

Dual Interlocking Lugs/ Eight Wire Application

Hardware not included. Lugs sold individually.

Dimensions

A: 1.16" (29.4mm)

B: 0.56" (14.3mm)

C: 2.06" (52.4mm)

L: 1.06" (27.0mm)

See Mechanical Drawing for detailed dimensions

"4S2-HEX" 2 AWG Quadruple wire lug, 2-14 AWG wire range, and FLEX wire, 4-12 AWG, class G-K including mm2 class 5, four barrel, aluminum or copper wire, CU9AL, 90C temperature rating, two 5/16" (8mm) dia. bolt mounting holes, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, CSA Certified. Made in the USA from domestic and imported parts. Stacking, nesting, and interlocking lugs permitted under UL White book ZMVV. International Hydraulics Inc.® brand.

	DIY Mounting Holes™: Cat. No. S2 Style No. ALL
CSA and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the 4S2-HEX Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

WIRE CONNECTORS AND SOLDERING LUGS (ZMVV)

INSTALLATION

Wire connectors are intended for use in installations covered by ANSI/NFPA 70, ‘‘National Electrical Code’’ (NEC), and should be installed using the prescribed manufacturer’s installation instructions.

"Stacking of connectors (multiple connectors assembled using a single bolt, nut and washers) may be permitted where mechanical interference is reduced or eliminated with the use of offset tangs, stacking adapters, and the like. The surface contact area of the mounting tang should make completecontact with the mounting surface or the previously stacked connector tang."

Ref. UL White Book ZMVV section

ZMVV UL Whitebook Installation Information

UL & CSA Approved for FLEX wire Class G-K sizes #4-12 AWG
Use of Ferrules (UL Listed) on wires 4-12 AWG

**TORK KRIMP® Method for clamping wires using uncrimped ferrules is protected under Patent No. 10630005. Full instructions for self crimping ferrules here.

Dimensions

A: 2.50" (63.5mm)

B: 0.50" (12.7mm)

C: 0.56" (14.3mm)

See Mechanical Drawing for detailed dimensions

"4S2-N-21-2" 2 AWG Quadruple wire lug, 2-14 AWG wire range, Multiple (dual) wire class B/C and FLEX, 4-12 AWG, 25mm2-4mm2, wire class G-K including mm2 class 5, four barrel, aluminum or copper wire, CU9AL, 90C temperature rating, two #10 bolt mounting holes, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, Canada Certified. Made in the USA from domestic and imported parts. International Hydraulics Inc® brand.

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

**TORK KRIMP® Method for clamping wires using uncrimped ferrules is protected under Patent No. 10630005. Full instructions for self crimping ferrules here.

Assembly PDF

Dual Interlocking Lugs/ Twelve Wire Application

Hardware not included. Lugs sold individually.

Dimensions

A: 1.16" (29.4mm)

B: 0.56" (14.3mm)

C: 3.13" (79.4mm)

L: 1.06" (27.0mm)

See Mechanical Drawing for detailed dimensions

"6S2-HEX" 2 AWG Quadruple wire lug, 2-14 AWG wire range, and FLEX wire, 4-12 AWG, class G-K including mm2 class 5, six barrel, aluminum or copper wire, CU9AL, 90C temperature rating, three 5/16" (8mm) dia. bolt mounting holes, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, CSA Certified. Made in the USA from domestic and imported parts. Stacking, nesting, and interlocking lugs permitted under UL White book ZMVV. International Hydraulics Inc.® brand.

	DIY Mounting Holes™: Cat. No. S2 Style No. ALL
CSA and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the 6S2-HEX Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

WIRE CONNECTORS AND SOLDERING LUGS (ZMVV)

INSTALLATION

Wire connectors are intended for use in installations covered by ANSI/NFPA 70, ‘‘National Electrical Code’’ (NEC), and should be installed using the prescribed manufacturer’s installation instructions.

"Stacking of connectors (multiple connectors assembled using a single bolt, nut and washers) may be permitted where mechanical interference is reduced or eliminated with the use of offset tangs, stacking adapters, and the like. The surface contact area of the mounting tang should make completecontact with the mounting surface or the previously stacked connector tang."

Ref. UL White Book ZMVV section

ZMVV UL Whitebook Installation Information

UL & CSA Approved for FLEX wire Class G-K sizes 4-12 AWG
Use of Ferrules (UL Listed) on wires 4-12 AWG

**TORK KRIMP® Method for clamping wires using uncrimped ferrules is protected under Patent No. 10630005. Full instructions for self crimping ferrules here.

Dimensions

A:1.28" (32.5mm)

B: 1.05" (26.7mm)

C: 1.48" (37.6mm)

L: 0.49" (12.4mm)

See Mechanical Drawing for detailed dimensions

"6S2-STK-21-19" 2 AWG multi wire lug, 2-14 AWG wire range, Multiple (dual) wire class B/C and FLEX, 4-12 AWG, 25mm2-4mm2, wire class G-K including mm2 class 5, six barrel, aluminum or copper wire, CU9AL, 90C temperature rating, three #10 (M5) dia. bolt mounting holes, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, Canada Certified. Made in the USA from domestic and imported parts. International Hydraulics Inc® brand.

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

**TORK KRIMP® Method for clamping wires using uncrimped ferrules is protected under Patent No. 10630005. Full instructions for self crimping ferrules here.

Dimensions

A: 1.63" (41.4mm)

B: 0.56" (14.2mm)

C: 1.00" (25.4mm)

L: 0.50" (12.7mm)

See Mechanical Drawing for detailed dimensions

"S2-NB-2" Four 4 barrel /wires (4) 2-14AWG wire range, and FLEX wire, 4-12 AWG, class G-K including mm2 class 5, slotted screws, Grounding or Power Distribution or Power Collection Lug. UL Listed for General Use including grounding in dry locations. Up to Four wires (4 conductors) aluminum or copper wire, CU9AL, 90C temperature rating, two (2) #10 Bolt mounting holes , Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, CSA Certified. IHI® brand. Made in the USA from domestic and imported parts.
Total current rating with 4 full size copper wires 460 Amps (75C).

Power and grounding use UL Listed lug, wire rated current capacity.

Screwdriver Bit Information

	DIY Mounting Holes™: Cat. No. S2 Style No. ALL
CSA and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the S2-NB-2 Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

**TORK KRIMP® Method for clamping wires using uncrimped ferrules is protected under Patent No. 10630005. Full instructions for self crimping ferrules here.

Dimensions

A: 1.63" (41.4mm)

B: 0.56" (14.2mm)

C: 1.00" (25.4mm)

L: 0.50" (12.7mm)

See Mechanical Drawing for detailed dimensions

"S2-NB-2-HEX" 2 AWG quadruple wire lug, four 4 barrel /wires (4) 2-14AWG wire range, and FLEX wire, 4-12 AWG, class G-K including mm2 class 5, Grounding or Power Distribution or Power Collection Lug. UL Listed for General Use including grounding in dry locations. Up to Four wires (4 conductors) aluminum or copper wire, CU9AL, 90C temperature rating, two (2) #10 Bolt mounting holes , Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, CSA Certified. IHI® brand. Made in the USA from domestic and imported parts.
Total current rating with 4 full size copper wires 460 Amps (75C).

Power and grounding use UL Listed lug, wire rated current capacity.

	DIY Mounting Holes™: Cat. No. S2 Style No. ALL
CSA and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the S2-NB-2-HEX Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

**TORK KRIMP® Method for clamping wires using uncrimped ferrules is protected under Patent No. 10630005. Full instructions for self crimping ferrules here.

Four wire application

Assembly PDF

Dual Interlocking Lugs/

Three Wire Application

2S1/0 and S1/0

Hardware not included.

Lugs sold individually.

Dimensions

A: 1.47" (37.3mm)

B: 0.81" (20.7mm)

C: 1.13" (28.6mm)

See Mechanical Drawing for detailed dimensions

"2S1/0" 1/0 AWG double wire lug, 1/0-14 AWG wire range, and multiple (dual) wires and FLEX wire, 1-8 AWG, class G-K including mm2 class 5, double barrel, aluminum or copper wire, CU9AL, 90C temperature rating, single 1/4" bolt mounting hole, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, CSA Certified. Made in the USA from domestic and imported parts. Stacking, nesting, and interlocking lugs permitted under UL White book ZMVV.

UL & CSA Approved for Multiple Wires 2X #14 to 2X #6 and FLEX wire Class G-K sizes #1-#8 AWG
Use of Ferrules (UL Listed) on wires 1-8 AWG

	DIY Mounting Holes™: Cat. No. 2S1/0 Style No. ALL
CSA and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the 2S1/0 Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

WIRE CONNECTORS AND SOLDERING LUGS (ZMVV)

INSTALLATION

Wire connectors are intended for use in installations covered by ANSI/NFPA 70, ‘‘National Electrical Code’’ (NEC), and should be installed using the prescribed manufacturer’s installation instructions.

"Stacking of connectors (multiple connectors assembled using a single bolt, nut and washers) may be permitted where mechanical interference is reduced or eliminated with the use of offset tangs, stacking adapters, and the like. The surface contact area of the mounting tang should make completecontact with the mounting surface or the previously stacked connector tang."

Ref. UL White Book ZMVV section

ZMVV UL Whitebook Installation Information

Approved for up to 4 wires

Assembly PDF

Dual/Interlocking Lugs

7-9 Wire Application

2S1/0-HEX and 3S6-2S4-HEX

Hardware not included.

Lugs sold individually.

Dimensions

A: 1.47" (37.3mm)

B: 0.81" (20.7mm)

C: 1.13" (28.6mm)

See Mechanical Drawing for detailed dimensions

"2S1/0-HEX" 1/0 AWG double wire lug, 1/0-14 AWG wire range, and multiple (dual) wires and FLEX wire, 1-8 AWG, class G-K including mm2 class 5, double barrel, aluminum or copper wire, CU9AL, 90C temperature rating, single 1/4" bolt mounting hole, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, CSA Certified. 3/16" Hex Socket Screw. Made in the USA from domestic and imported parts. Stacking, nesting, and interlocking lugs permitted under UL White book ZMVV.

UL & CSA Approved for Multiple Wires 2X #14 to 2X #6 and FLEX wire Class G-K sizes #1-#8 AWG
Use of Ferrules (UL Listed) on wires 1-8 AWG

	DIY Mounting Holes™: Cat. No. 2S1/0- Style No. ALL
CSA and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the 2S1/0-HEX Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

WIRE CONNECTORS AND SOLDERING LUGS (ZMVV)

INSTALLATION

Wire connectors are intended for use in installations covered by ANSI/NFPA 70, ‘‘National Electrical Code’’ (NEC), and should be installed using the prescribed manufacturer’s installation instructions.

"Stacking of connectors (multiple connectors assembled using a single bolt, nut and washers) may be permitted where mechanical interference is reduced or eliminated with the use of offset tangs, stacking adapters, and the like. The surface contact area of the mounting tang should make completecontact with the mounting surface or the previously stacked connector tang."

Ref. UL White Book ZMVV section

ZMVV UL Whitebook Installation Information

Approved for up to 4 wires

Assembly PDF

Dual/Interlocking Lugs

7-9 Wire Application

2S1/0-HEX and 3S6-2S4-HEX-M

Hardware not included.

Lugs sold individually.

Dimensions

A: 1.47" (37.3mm)

B: 0.81" (20.7mm)

C: 1.13" (28.6mm)

See Mechanical Drawing for detailed dimensions

Note!!!   This part has a 5mm hex socket for use in metric countries.

"2S1/0-HEX-M" 1/0 AWG metric double wire lug, 1/0-14 AWG wire range, and multiple (dual) wires and FLEX wire, 1-8 AWG, class G-K including mm2 class 5, double barrel, aluminum or copper wire, CU9AL, 90C temperature rating, single 1/4" bolt mounting hole, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, CSA Certified. 5mm Hex Socket Screw. Made in the USA from domestic and imported parts. Stacking, nesting, and interlocking lugs permitted under UL White book ZMVV.

UL & CSA Approved for Multiple Wires 2X #14 to 2X #6 and FLEX wire Class G-K sizes #1-#8 AWG
Use of Ferrules (UL Listed) on wires 1-8 AWG, Also class 2 & 5 mm2 sizes single and dual per rating label.

	DIY Mounting Holes™: Cat. No. 2S1/0 Style No. ALL
CSA and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the 2S1/0-HEX-M Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

Assembly PDF Dual Interlocking Lugs/ Four Wire Application   Hardware not included. Lugs sold individually.

Dimensions

A: 1.47" (37.3mm)

B: 0.81" (20.7mm)

C: 1.20" (30.6mm)

L: 0.64" (16.3mm)

See Mechanical Drawing for detailed dimensions

"2S2/0-31-42" 2/0 AWG double wire lug, 2/0-14 AWG wire range, and FLEX wire, 1/0-14 AWG, class G-K including mm2 class 5, 2 barrel, aluminum or copper wire, CU9AL, 90C temperature rating, TURN PREVENT USING TWO 1/4" bolts (hole is .315 +/-.007) mounting holes, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, CSA Certified. Made in the USA from domestic and imported parts. Stacking, nesting, and interlocking lugs permitted under UL White book ZMVV.

	DIY Mounting Holes™: Cat. No. 2S2/0 Style No. 3
CSA and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the 2S2/0-31-42 Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

WIRE CONNECTORS AND SOLDERING LUGS (ZMVV)

INSTALLATION

Wire connectors are intended for use in installations covered by ANSI/NFPA 70, ‘‘National Electrical Code’’ (NEC), and should be installed using the prescribed manufacturer’s installation instructions.

"Stacking of connectors (multiple connectors assembled using a single bolt, nut and washers) may be permitted where mechanical interference is reduced or eliminated with the use of offset tangs, stacking adapters, and the like. The surface contact area of the mounting tang should make completecontact with the mounting surface or the previously stacked connector tang."

Ref. UL White Book ZMVV section

ZMVV UL Whitebook Installation Information

UL & CSA Approved for FLEX wire Class G-K sizes #1/0-#14 AWG
Use of Ferrules (UL Listed) on wires 1/0-14 AWG

Assembly PDF Dual Interlocking Lugs/ Four Wire Application   Hardware not included. Lugs sold individually.

Dimensions

A: 1.47" (37.3mm)

B: 0.81" (20.7mm)

C: 1.20" (30.6mm)

L: 0.64" (16.3mm)

See Mechanical Drawing for detailed dimensions

"2S2/0-31-42-HEX" 2/0 AWG double wire lug, 2/0-14 AWG wire range, and FLEX wire, 1/0-14 AWG, class G-K including mm2 class 5, 2 barrel, aluminum or copper wire, CU9AL, 90C temperature rating, TURN PREVENT USING TWO 1/4" bolts (hole is .315 +/-.007) mounting holes, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, CSA Certified. Made in the USA from domestic and imported parts. Stacking, nesting, and interlocking lugs permitted under UL White book ZMVV.

	DIY Mounting Holes™: Cat. No. 2S2/0 Style No. 3
CSA and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the 2S2/0-31-42-HEX Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

WIRE CONNECTORS AND SOLDERING LUGS (ZMVV)

INSTALLATION

Wire connectors are intended for use in installations covered by ANSI/NFPA 70, ‘‘National Electrical Code’’ (NEC), and should be installed using the prescribed manufacturer’s installation instructions.

"Stacking of connectors (multiple connectors assembled using a single bolt, nut and washers) may be permitted where mechanical interference is reduced or eliminated with the use of offset tangs, stacking adapters, and the like. The surface contact area of the mounting tang should make completecontact with the mounting surface or the previously stacked connector tang."

Ref. UL White Book ZMVV section

ZMVV UL Whitebook Installation Information

UL & CSA Approved for FLEX wire Class G-K sizes #1/0-#14 AWG
Use of Ferrules (UL Listed) on wires 1/0-14 AWG

Approved for two to four wire use (two wires per barrel)

Dimensions

A: 2.50" (63.5mm)

B: 1.13" (28.7mm)

C: 0.83" (21.1mm)

See Mechanical Drawing for detailed dimensions

Approved for two to four wire use (two wires per barrel)

Dimensions

A: 4.00" (101.6mm)

B: 1.13" (28.7mm)

C: 0.83" (21.1mm)

See Mechanical Drawing for detailed dimensions

4 wires

3 wires

Dimensions

A: 2.56" (65.1mm)

B: 1.19" (30.2mm)

C: 1.63" (41.3mm)

See Mechanical Drawing for detailed dimensions

Compact Multi-Wire Lug
to hold 3 or 4 wires

"2S250" dual: 250 kcmil (4/0 AWG) double wire lug, 250 kcmil (4/0 AWG)- 6 AWG wire range, and FLEX wire, 3/0-6 AWG, class G-K including mm2 class 5, standard copper wire only, and can hold up to 4 wires, 2 per wire hole. CU9AL (250kcmli wire lug), 90C temperature rating, single 3/8" bolt mounting hole, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, CSA Certified. Made in the USA from domestic and imported parts.

	DIY Mounting Holes™: Cat. No. 2S250 Style No. 1
CSA and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the 2S250 Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

Approved for up to 6 wires

Dimensions

A: 3.13" (79.5mm)

B: 1.56" (39.6mm)

C: 2.50" (63.5mm)

I: 0.63" (7.6mm)

See Mechanical Drawing for detailed dimensions

"3S250TP" 250 kcmil (4/0 AWG) triple wire lug triple barrel, 250 kcmil (4/0 AWG)-6 AWG wire range, and FLEX wire, 3/0-6 AWG, class G-K including mm2 class 5, multiple wire (dual) per end, class B/C, and single per end, FLEX wire class G-K including mm2 class 5, aluminum or copper wire, CU9AL, 90C temperature rating, single mounting hole , Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, CSA Certified. With Turn Prevent rib. 
IHI® brand. Made in the USA from domestic and imported parts.

UL & CSA Approved for Multiple wires class B, C, 2X AWG 2-6 &2X 25-16 mm2 & FLEX wire Classes G-K sizes #3/0-#6 AWG

	DIY Mounting Holes™: Cat. No. 2S250 Style No. 2
CSA and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the 3S250TP Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

Dimensions

A: 2.00" (50.8mm)

B: 1.13" (28.6mm)

C: 1.00" (25.4mm)

See Mechanical Drawing for detailed dimensions

"S350" 350 kcmil multi wire lug kit, 350 kcmil-6 AWG wire range, and FLEX wire, 262 kcmil-4 AWG, class G-K including mm2 class 5, 1 barrel, aluminum or copper wire, CU9AL, 90C temperature rating, one mounting hole of .343 inch dia. 5/16" bolt, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, CSA Certified. IHI® brand.

UL & CSA Approved for FLEX wire Class G-K sizes #262 kcmil-#4 AWG
Use of Ferrules (UL Listed) on wires 262 kcmil-4 AWG

Kit includes: (x1) 5/16-18" UNC x ¾ long Steel zinc plated RoHS hex washer head screw & (x1) 1-5/16" washer.

Bolt length is designed for mounting to the 24S4-3 or 36S4-3 multi-hole power distribution lugs.

UL508A Information on Standoff Insulators

Assembly of Stacked Connectors and Standoffs

	DIY Mounting Holes™: Cat. No. S350 Style No. 1
CSA and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the S350 Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

Assembly PDF

Dual/Interlocking Lugs Eight Wire Application

Hardware not included.

Lugs sold individually.

Dimensions

A: 3.98" (101.1mm)

B: 1.25" (31.8mm)

C: 3.98" (101.1mm)

L: 1.75" (44.5mm)

See Mechanical Drawing for detailed dimensions

"4S350-56-88" 350 kcmil quadruple wire panelboard lug, 350kcmil-6 AWG wire range, panel Lug. Four barrel / wires (4 conductors) aluminum or copper wire, CU9AL, 90C temperature rating, two 1/2" bolt mounts at 1 3/4" or at 2" centers. Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, CSA Certified. Stacking, nesting, and interlocking lugs permitted under UL White book ZMVV. IHI® brand. Made in the USA from domestic and imported parts.

	DIY Mounting Holes™: Cat. No. 2S350 Style No. ALL
CSA and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the 4S350-56-88-HEX Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

WIRE CONNECTORS AND SOLDERING LUGS (ZMVV)

INSTALLATION

Wire connectors are intended for use in installations covered by ANSI/NFPA 70, ‘‘National Electrical Code’’ (NEC), and should be installed using the prescribed manufacturer’s installation instructions.

"Stacking of connectors (multiple connectors assembled using a single bolt, nut and washers) may be permitted where mechanical interference is reduced or eliminated with the use of offset tangs, stacking adapters, and the like. The surface contact area of the mounting tang should make completecontact with the mounting surface or the previously stacked connector tang."

Ref. UL White Book ZMVV section

ZMVV UL Whitebook Installation Information