All cart purchases are made through Lugsdirect.com. Enquiries should be directed to sales@lugsdirect.com or call 330-562-8983

Dimensions

A: 0.31" (7.9mm)

B: 0.65" (16.5mm)

C: 0.26" (6.6mm)

See Mechanical Drawing for detailed dimensions

*Wire range only valid with use of a bus bar or staple.

"B12" 12 AWG OEM, 12-16 AWG wire range, tin plated aluminum, single wire, copper wire only, CU7, 75C temperature rating, UL Recognized at 600v - acceptable for use through 2000v.

Temperature Range and Rating Guide

Please email for higher volume prices

Dimensions

A: 0.31" (7.9mm)

B: 0.65" (16.5mm)

C: 0.26" (6.6mm)

See Mechanical Drawing for detailed dimensions

B12-PCB-S: 12 AWG PCB wire lug, 12-16* AWG, 20 AMP, slotted head screw. 2 LEGS at .14X.063” cross section and 0.12” (3.0mm) penetration PCB penetration. Side wire, and top screw entrance. UL Recognized at 600v - acceptable for use through 2000v, Made in USA.

Temperature Range and Rating Guide

Body and Staple THT Types

 Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. THT (Through Hole Technology). Copper wire, stranded and solid wire per UL486 wire code. Solid copper bus staple for tens of micro ohms range of copper to copper high conductivity, low resistance current path.  Meets IEC volt drop test standards. 

*16 AWG or fine stranded wires recommend to use wire ferrules.

Dimensions

A: 0.31" (7.9mm)

B: 0.65" (16.5mm)

C: 0.26" (6.6mm)

See Mechanical Drawing for detailed dimensions

B12-PCB-NM-HEX: 10 AWG PCB wire lug, 10-14,16* AWG, 20 AMP, Hex socket screw. 2 LEGS at .14X.063” cross section and 0.12” (3.0mm) penetration PCB penetration. Side wire, and top screw entrance. No markings on body.

*16 AWG or fine stranded wires recommend to use wire ferrules.

Temperature Range and Rating Guide

Body and Staple THT Types

 Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. THT (Through Hole Technology). Copper wire, stranded and solid wire per UL486 wire code. Solid copper bus staple for tens of micro ohms range of copper to copper high conductivity, low resistance current path.  Meets IEC volt drop test standards. 

Dimensions

A: 0.31" (7.9mm)

B: 0.65" (16.5mm)

C: 0.26" (6.6mm)

See Mechanical Drawing for detailed dimensions

B12-PCB24-NM-HEX: 10 AWG PCB wire lug, 10-14,16* AWG, 20 AMP, Hex socket screw. 2 LEGS at .14X.063” cross section and 0.12” (3.0mm) penetration PCB penetration. Side wire, and top screw entrance. No markings on body.

*16 AWG or fine stranded wires recommend to use wire ferrules.

Temperature Range and Rating Guide

Body and Staple THT Types

 Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. THT (Through Hole Technology). Copper wire, stranded and solid wire per UL486 wire code. Solid copper bus staple for tens of micro ohms range of copper to copper high conductivity, low resistance current path.  Meets IEC volt drop test standards. 

Dimensions

A: 0.34" (8.6mm)

B: 0.49" (12.4mm)

C: 0.26" (6.6mm)

D: 0.39" (9.9mm)

See Mechanical Drawing for detailed dimensions

B10-PCB: 10 AWG PCB wire lug, 10-16* AWG, 30 AMP, slotted head screw. 1 leg at .336X.14” with a .10" (2.54mm) PCB penetration. Side wire, and top screw entrance.

Temperature Range and Rating Guide

One piece Body THT Types

Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. THT (Through Hole Technology). Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards. Variety of wire binding screw options.

Soldering Recommendations

*16 AWG or fine stranded wires recommend to use wire ferrules.

Dimensions

A: 0.34" (8.6mm)

B: 0.49" (12.4mm)

C: 0.26" (6.6mm)

D: 0.39" (9.9mm)

See Mechanical Drawing for detailed dimensions

B10-PCB-HEX: 10 AWG PCB wire lug, 10-16* AWG, 30 AMP, Hex socket screw. 1 leg at .336X.14” with a .10" (2.54mm) PCB penetration. Side wire, and top screw entrance.

Temperature Range and Rating Guide

One piece Body THT Types

Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. THT (Through Hole Technology). Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards. Variety of wire binding screw options.

Soldering Recommendations

*16 AWG or fine stranded wires recommend to use wire ferrules.

Dimensions

A: 0.34" (8.6mm)

B: 0.49" (12.4mm)

C: 0.26" (6.6mm)

D: 0.39" (9.9mm)

See Mechanical Drawing for detailed dimensions

B10-PCB-RLM-KIT: 10 AWG PCB wire lug, 10-16* AWG, 30 AMP, ring lug mount with Phillips screw and washer. 1 leg at .336X.14” with a .10" (2.54mm) PCB penetration. Side wire, and top screw entrance.

Temperature Range and Rating Guide

One piece Body THT Types

Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. THT (Through Hole Technology). Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards. Variety of wire binding screw options.

Soldering Recommendations

*16 AWG or fine stranded wires recommend to use wire ferrules.

Dimensions

A: 0.34" (8.6mm)

B: 0.49" (12.4mm)

C: 0.26" (6.6mm)

D: 0.39" (9.9mm)

See Mechanical Drawing for detailed dimensions

B10-PCB-RLM-G-KIT: 10 AWG PCB wire lug, 10-16* AWG - wire range depends on the wire range of the ring lug. 30 AMP, green Phillips/slotted combo grounding screw, 1 leg at .336X.14” with a .10"(2.54mm) PCB penetration. Top screw entrance. For use with ring lug. Not intended for wire insertion except with bare, #10 AWG, solid grounding wire.

Temperature Range and Rating Guide

One piece Body THT Types

Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. THT (Through Hole Technology). Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards. Variety of wire binding screw options.

Soldering Recommendations

*16 AWG or fine stranded wires recommend to use wire ferrules.

Surface Mount Application | #10 AWG Solid, Grounding Wire Application | Ring lug not included

Dimensions

A: 0.34" (8.6mm)

B: 0.49" (12.4mm)

C: 0.26" (6.6mm)

D: 0.39" (9.9mm)

See Mechanical Drawing for detailed dimensions

B10-PCB-NS: 10 AWG PCB wire lug, 10-16* AWG. Sold less the wire binding screws so clients can provide their own #10-32 screw. 30 AMP, no screw. Side wire, and side screw entrance.

Temperature Range and Rating Guide

One piece Body THT Types

Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. THT (Through Hole Technology). Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards. Variety of wire binding screw options.

Soldering Recommendations

*16 AWG, 18 AWG, or fine stranded wires recommend to use wire ferrules.

Dimensions

A: 0.34" (8.6mm)

B: 0.52" (13.2mm)

C: 0.34" (8.6mm)

D: 0.42" (10.7mm)

See Mechanical Drawing for detailed dimensions

B6A-PCB: 6 AWG PCB wire lug, 6-18* AWG, 65 AMP, slotted set screw. 1 leg at .336X.14” with a .10" (2.54mm) PCB penetration. Side wire, and top screw entrance.

Temperature Range and Rating Guide

One piece Body THT Types

Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. THT (Through Hole Technology). Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards. Variety of wire binding screw options.

Soldering Recommendations

*16 AWG, 18 AWG, or fine stranded wires recommend to use wire ferrules.

Dimensions

A: 0.34" (8.6mm)

B: 0.52" (13.2mm)

C: 0.34" (8.6mm)

D: 0.42" (10.7mm)

See Mechanical Drawing for detailed dimensions

B6A-PCB-SS is End Of Life status with limited long term parts supply, see replacement part B6A-PCB with zinc plated steel screw.

Current stock 70,000 pcs (4/2024)

Lead time for 5k 2 weeks from PO for assembly

Lead time for large quantities 2 weeks plus 1 week per 10k pcs for assembly

B6A-PCB-SS: 6 AWG PCB wire lug, 6-18* AWG, 65 AMP, slotted set screw. 1 leg at .336X.14” with a .10" (2.54mm) PCB penetration. Side wire, and top screw entrance.

Temperature Range and Rating Guide

One piece Body THT Types

Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. THT (Through Hole Technology). Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards. Variety of wire binding screw options.

Soldering Recommendations

*16 AWG, 18 AWG, or fine stranded wires recommend to use wire ferrules.

Dimensions

A: 0.34" (8.6mm)

B: 0.52" (13.2mm)

C: 0.34" (8.6mm)

D: 0.42" (10.7mm)

See Mechanical Drawing for detailed dimensions

B6A-PCB-HEX: 6 AWG PCB wire lug, 6-18* AWG, 65 AMP, HEX socket set screw. 1 leg at .336X.14”with a .10" (2.54mm) PCB penetration. Side wire, and top screw entrance, 1/8” or (option) 3mm HEX socket set screw.

Temperature Range and Rating Guide

One piece Body THT Types

Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. THT (Through Hole Technology). Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards. Variety of wire binding screw options.

Soldering Recommendations

*16 AWG, 18 AWG, or fine stranded wires recommend to use wire ferrules.

Dimensions

A: 0.34" (8.6mm)

B: 0.52" (13.2mm)

C: 0.34" (8.6mm)

D: 0.42" (10.7mm)

See Mechanical Drawing for detailed dimensions

Note!!!   This part has a 3mm hex socket for use in metric countries.

B6A-PCB-HEX-M: 6 AWG PCB wire lug, 6-18* AWG, 65 AMP, Metric Hex socket set screw. 1 leg at .336X.14”with a .10" (2.54mm) PCB penetration. Side wire, and top screw entrance, 1/8” or (option) 3mm HEX socket set screw.

Temperature Range and Rating Guide

One piece Body THT Types

Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. THT (Through Hole Technology). Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards. Variety of wire binding screw options.

Soldering Recommendations

*16 AWG, 18 AWG, or fine stranded wires recommend to use wire ferrules.

Dimensions

A: 0.34" (8.6mm)

B: 0.52" (13.2mm)

C: 0.34" (8.6mm)

D: 0.42" (10.7mm)

See Mechanical Drawing for detailed dimensions

B6A-PCB-RS: 6 AWG PCB wire lug, 6-16* AWG, 65 AMP, Slotted & Robertson Recess Head screw. 1 leg at .336X.14” with a .10" (2.54mm) PCB penetration. Side wire, and top screw entrance.

Temperature Range and Rating Guide

One piece Body THT Types

Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. THT (Through Hole Technology). Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards. Variety of wire binding screw options.

Soldering Recommendations

*16 AWG or fine stranded wires recommend to use wire ferrules.

Dimensions

A: 0.34" (8.6mm)

B: 0.52" (13.2mm)

C: 0.34" (8.6mm)

D: 0.42" (10.7mm)

See Mechanical Drawing for detailed dimensions

B6A-PCB-RS-NS: 6 AWG PCB wire lug, 6-14 AWG, 65 AMP, 1 leg at .336X.14” with a .10" (2.54mm) PCB penetration. Side wire and top screw entrance.

Temperature Range and Rating Guide

One piece Body THT Types

Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. THT (Through Hole Technology). Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards. Variety of wire binding screw options.

Soldering Recommendations

Dimensions

A: 0.34" (8.6mm)

B: 0.57" (14.5mm)

C: 0.34" (8.6mm)

D: 0.44" (11.2mm)

See Mechanical Drawing for detailed dimensions

B6A-NH-PCB-RS-NS: 6 AWG PCB wire lug, 6-14 AWG, 65 AMP, 1 leg at .336X.14” with a .13" (3.30mm) PCB penetration. Top screw entrance.

Temperature Range and Rating Guide

One piece Body THT Types

Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. THT (Through Hole Technology). Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards. Variety of wire binding screw options.

Soldering Recommendations

"Marine Version" 2RLM with B6A-NH-PCB-RS-NS and customer supplied standard commercial stainless hardware

Ring lug not included

Part not assembled

Dimensions

A: 0.34" (8.6mm)

B: 0.52" (13.2mm)

C: 0.34" (8.6mm)

D: 0.42" (10.7mm)

See Mechanical Drawing for detailed dimensions

B6A-PCB-RLM (KIT): 6 AWG PCB wire lug, 6-16* AWG, 65 AMP, Hex Cap screw, and washer (ring lug not included). 1 leg at .336X.14” with a .10" (2.54mm) PCB penetration. Side wire, and top screw entrance.

Temperature Range and Rating Guide

One piece Body THT Types

Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. THT (Through Hole Technology). Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards. Variety of wire binding screw options.

Soldering Recommendations

*16 AWG or fine stranded wires recommend to use wire ferrules.
Ring lugs not included.
Part not assembled.

Ring lugs not included

Part not assembled

Dimensions

A: 0.34" (8.6mm)

B: 0.52" (13.2mm)

C: 0.34" (8.6mm)

D: 0.42" (10.7mm)

See Mechanical Drawing for detailed dimensions

B6A-PCB-2RLM (KIT): 6 AWG PCB wire lug, 6-16* AWG, 65 AMP, Hex Cap screw, and washer (ring lugs not included) able to fit 2 ring lug mounts. 1 leg at .336X.14” with a .10" (2.54mm) PCB penetration. Side wire, and top screw entrance.

Temperature Range and Rating Guide

One piece Body THT Types

Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. THT (Through Hole Technology). Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards. Variety of wire binding screw options.

Soldering Recommendations

*16 AWG or fine stranded wires recommend to use wire ferrules.
Ring lugs not included.
Part not assembled.

"Marine Version" 2RLM with B6A-NH-PCB-RS-NS and customer supplied standard commercial stainless hardware

Dimensions

A: 0.38" (9.5mm)

B: 0.53" (13.5mm)

C: 0.38" (9.7mm)

See Mechanical Drawing for detailed dimensions

B6B-PCB: 6 AWG PCB wire lug, 6-14 AWG, 65 AMP, slotted set screw. 2 legs (.20X.05”) with a 0.15" (3.8mm) PCB penetration. Side wire, and top screw entrance. International Hydraulics Inc.® brand.

Temperature Range and Rating Guide

One piece Body THT Types

Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. THT (Through Hole Technology). Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid copper bus staple for tens of micro ohms range of copper to copper high conductivity, low resistance current path. Meets IEC volt drop test standards. Variety of THT leg length to accommodate PCB of various thicknesses including multilayer.

Zinc plated steel screw, and tin plated copper staple, solderable

Dimensions

A: 0.53" (13.5mm)

B: 0.50" (12.7mm)

C: 0.34" (8.6mm)

See Mechanical Drawing for detailed dimensions

B6A-PCB-45: 6 AWG PCB wire lug, 6-18* AWG, 65 AMP, slotted screw, 1 leg at .336X.14” with a .125" (3.18mm) PCB penetration. Top wire, and screw entrance at 45 degrees.

Temperature Range and Rating Guide

One piece Body THT Types

Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. THT (Through Hole Technology). Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards. Variety of wire binding screw options.

Soldering Recommendations

*16 AWG, 18 AWG, or fine stranded wires recommend to use wire ferrules.

Dimensions

A: 0.53" (13.5mm)

B: 0.50" (12.7mm)

C: 0.34" (8.6mm)

See Mechanical Drawing for detailed dimensions

B6A-PCB-45-HEX: 6 AWG PCB wire lug, 6-18* AWG, 65 AMP, HEX socket screw, 1 leg at .336X.14” with a .125" (3.18mm) PCB penetration. Top wire, and screw entrance at 45 degrees.

Temperature Range and Rating Guide

One piece Body THT Types

Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. THT (Through Hole Technology). Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards. Variety of wire binding screw options.

Soldering Recommendations

*16 AWG, 18 AWG, or fine stranded wires recommend to use wire ferrules.

Dimensions

A: 0.53" (13.5mm)

B: 0.50" (12.7mm)

C: 0.34" (8.6mm)

See Mechanical Drawing for detailed dimensions

B6A-PCB-45-HEX-M: 6 AWG PCB wire lug, 6-18* AWG, 65 AMP, HEX socket screw, 1 leg at .336X.14” with a .125" (3.18mm) PCB penetration. Top wire, and screw entrance at 45 degrees.

Temperature Range and Rating Guide

One piece Body THT Types

Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. THT (Through Hole Technology). Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards. Variety of wire binding screw options.

Soldering Recommendations

*16 AWG, 18 AWG, or fine stranded wires recommend to use wire ferrules.

Dimensions

A: 0.53" (13.5mm)

B: 0.50" (12.7mm)

C: 0.34" (8.6mm)

See Mechanical Drawing for detailed dimensions

B6A-PCB-45-RS: 6 AWG PCB wire lug, 6-18* AWG, 65 AMP, slotted Robertson recess screw, 1 leg at .336X.14” with a .125" (3.18mm) PCB penetration. Top wire, and screw entrance at 45 degrees.

Temperature Range and Rating Guide

One piece Body THT Types

Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. THT (Through Hole Technology). Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards. Variety of wire binding screw options.

Soldering Recommendations

*16 AWG, 18 AWG, or fine stranded wires recommend to use wire ferrules.

Dimensions

A: 0.38" (9.7mm)

B: 0.62" (15.7mm)

C: 0.38" (9.7mm)

D: 0.49" (12.4mm)

See Mechanical Drawing for detailed dimensions

B4A-PCB: 4 AWG PCB wire lug, 4-14 AWG, 85 AMP, slotted screw. 1 leg at .375X.14”with a .13" (3.3mm) PCB penetration. Side wire, and top screw entrance, slotted screw. International Hydraulics Inc.® brand.

Temperature Range and Rating Guide

One piece Body THT Types

Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. THT (Through Hole Technology). Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards. Variety of wire binding screw options.

Soldering Recommendations

Zinc plated steel screw, and integrated aluminum foot, tin plated, solderable

Dimensions

A: 0.38" (9.7mm)

B: 0.62" (15.7mm)

C: 0.38" (9.7mm)

D: 0.49" (12.4mm)

See Mechanical Drawing for detailed dimensions

B4A-PCB-HEX: 4 AWG PCB wire lug, 4-14 AWG, 85 AMP, HEX socket set screw. 1 leg at .375X.14”with a .13" (3.3mm) PCB penetration. Side wire, and top screw entrance, 1/8” HEX socket set screw. International Hydraulics Inc.® brand.

Temperature Range and Rating Guide

One piece Body THT Types

Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. THT (Through Hole Technology). Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards. Variety of wire binding screw options.

Soldering Recommendations

Zinc plated steel screw, and integrated aluminum foot, tin plated, solderable

Dimensions

A: 0.38" (9.7mm)

B: 0.62" (15.7mm)

C: 0.38" (9.7mm)

D: 0.49" (12.4mm)

See Mechanical Drawing for detailed dimensions

B4A-PCB-HEX-M: 4 AWG PCB wire lug, 4-14 AWG, 85 AMP, Metric HEX socket set screw. 1 leg at .375X.14”with a .13" (3.3mm) PCB penetration. Side wire, and top screw entrance, 3mm HEX socket set screw. International Hydraulics Inc.® brand.

Temperature Range and Rating Guide

One piece Body THT Types

Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. THT (Through Hole Technology). Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards. Variety of wire binding screw options.

Soldering Recommendations

Zinc plated steel screw, and integrated aluminum foot, tin plated, solderable

Dimensions

A: 0.38" (9.7mm)

B: 0.62" (15.7mm)

C: 0.38" (9.7mm)

D: 0.49" (12.4mm)

See Mechanical Drawing for detailed dimensions

B4A-PCB-RS: 4 AWG PCB wire lug, 4-14 AWG, 85 AMP, slotted robertson recess head screw. 1 leg at .375X.14” with a .13" (3.3mm) PCB penetration. Side wire, and top screw entrance, slotted robertson recess head screw. International Hydraulics Inc.® brand.

Temperature Range and Rating Guide

One piece Body THT Types

Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. THT (Through Hole Technology). Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards. Variety of wire binding screw options.

Soldering Recommendations

Zinc plated steel screw, and integrated aluminum foot, tin plated, solderable

Dimensions

A: 0.38" (9.7mm)

B: 0.62" (15.7mm)

C: 0.38" (9.7mm)

D: 0.49" (12.4mm)

See Mechanical Drawing for detailed dimensions

B4A-PCB-RLM: 4 AWG PCB wire lug, 4-14 AWG, 85 AMP, no screw. 1 leg at .375X.14” with a .13" (3.3mm) PCB penetration. Side wire, and top screw entrance, hex cap screw and washer. International Hydraulics Inc.® brand.

Temperature Range and Rating Guide

One piece Body THT Types

Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. THT (Through Hole Technology). Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards. Variety of wire binding screw options.

Soldering Recommendations

Zinc plated steel screw, and integrated aluminum foot, tin plated, solderable

Ring Lugs not included.

Dimensions

A: 0.38" (9.7mm)

B: 0.62" (15.7mm)

C: 0.38" (9.7mm)

D: 0.49" (12.4mm)

See Mechanical Drawing for detailed dimensions

B4A-PCB-2RLM-KIT: 4 AWG PCB wire lug, 4-14 AWG, 85 AMP, Hex Socket Cap screw, and washer (ring lugs not included) able to fit 2 ring lug mounts. (ring lug not included). 1 leg at .375X.14” with a .13" (3.3mm) PCB penetration. Side wire, and top screw entrance. IHI Connectors® brand.

Temperature Range and Rating Guide

One piece Body THT Types

Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. THT (Through Hole Technology). Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards. Variety of wire binding screw options.

Soldering Recommendations

Integrated aluminum foot, tin plated, solderable

Dimensions

A: 0.38" (9.7mm)

B: 0.62" (15.7mm)

C: 0.38" (9.7mm)

D: 0.49" (12.4mm)

See Mechanical Drawing for detailed dimensions

B4A-PCB-NS: 4 AWG PCB wire lug, 4-14 AWG, 85 AMP, no screw. 1 leg at .375X.14” with a .13" (3.3mm) PCB penetration. Side wire, and top screw entrance, no screw. International Hydraulics Inc.® brand.

Temperature Range and Rating Guide

One piece Body THT Types

Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. THT (Through Hole Technology). Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards. Variety of wire binding screw options.

Soldering Recommendations

No screw, and integrated aluminum foot, tin plated, solderable

Dimensions

A: 0.53" (13.5mm)

B: 0.50" (12.7mm)

C: 0.38" (9.7mm)

See Mechanical Drawing for detailed dimensions

B4A-PCB-45: 4 AWG PCB wire lug, 4-18* AWG, 85 AMP, slotted set screw, 1 leg at .375x.14” with a .125" (3.18mm) PCB penetration. Top wire, and screw entrance at 45 degrees.

Temperature Range and Rating Guide

One piece Body THT Types

Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. THT (Through Hole Technology). Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards. Variety of wire binding screw options.

Soldering Recommendations

*16 AWG, 18 AWG, or fine stranded wires recommend to use wire ferrules.

Dimensions

A: 0.53" (13.5mm)

B: 0.50" (12.7mm)

C: 0.38" (9.7mm)

See Mechanical Drawing for detailed dimensions

B4A-PCB-45-HEX: 4 AWG PCB wire lug, 4-18* AWG, 85 AMP, Hex socket screw, 1 leg at .375x.14” with a .125" (3.18mm) PCB penetration. Top wire, and screw entrance at 45 degrees.

Temperature Range and Rating Guide

One piece Body THT Types

Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. THT (Through Hole Technology). Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards. Variety of wire binding screw options.

Soldering Recommendations

*16 AWG, 18 AWG, or fine stranded wires recommend to use wire ferrules.

Dimensions

A: 0.53" (13.5mm)

B: 0.50" (12.7mm)

C: 0.38" (9.7mm)

See Mechanical Drawing for detailed dimensions

B4A-PCB-45-RS: 4 AWG PCB wire lug, 4-18* AWG, 85 AMP, Slotted Robertson recess screw, 1 leg at .375x.14” with a .125" (3.18mm) PCB penetration. Top wire, and screw entrance at 45 degrees.

Temperature Range and Rating Guide

One piece Body THT Types

Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. THT (Through Hole Technology). Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards. Variety of wire binding screw options.

Soldering Recommendations

*16 AWG, 18 AWG, or fine stranded wires recommend to use wire ferrules.

Dimensions

A: 0.53" (13.5mm)

B: 0.50" (12.7mm)

C: 0.38" (9.7mm)

See Mechanical Drawing for detailed dimensions

B4A-PCB-45-RLM-KIT: 4 AWG PCB wire lug, 4-18 AWG, 85 AMP, Hex cap screw, and washer. 1 leg at .375X.14” with a .125" (3.18mm) PCB penetration. Top wire, and screw entrance at 45 degrees.

Temperature Range and Rating Guide

One piece Body THT Types

Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. THT (Through Hole Technology). Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards. Variety of wire binding screw options.

Soldering Recommendations

Dimensions

A: 0.47" (11.9mm)

B: 0.55" (14.0mm)

C: 0.46" (11.7mm)

See Mechanical Drawing for detailed dimensions

*Wire range only valid with use of a bus bar or staple.

"B4B-B" 4 AWG OEM, 4-14 AWG wire range, single wire, all copper body, solid brass screw, copper wire only, CU9, 90C temperature rating, CSA Certified, good for heavy duty applications and environments and "copper only" codes, oversized wire opening. Flat end screw with cut trepan face for gripping large and small stranded wires without damage. 0.20" Dia. plain mounting hole (#10 screw) or bus "keeper" hole (may be tapped 1/4-28 by user and permitted in file).

Temperature Range and Rating Guide

Please email for higher volume prices

Tested and Certified to UL486B /C22.2 No65 for USA and Canada by CSA

Dimensions

A: 0.47" (11.9mm)

B: 0.55" (14.0mm)

C: 0.46" (11.7mm)

See Mechanical Drawing for detailed dimensions

"B4B-PCB-B" 4 AW, 95 AMP, 4-14 AWG wire range, single wire, all copper body, solid brass screw, copper wire only, CU9, 90C temperature rating, CSA Certified for USA and Canada, oversized wire opening. Flat end screw with cut trepan face for gripping large and small stranded wires without damage. 2 legs at .3 x .063 with a .15" penetration. International Hydraulics Inc.® brand.

Temperature Range and Rating Guide

Body and Staple THT Types

 Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. THT (Through Hole Technology). Copper wire, stranded and solid wire per UL486 wire code. Solid copper bus staple for tens of micro ohms range of copper to copper high conductivity, low resistance current path.  Meets IEC volt drop test standards. Variety of THT leg length to accommodate PCB of various thicknesses including multilayer. 

Dimensions

A: 0.41" (10.4mm)

B: 0.56" (14.2mm)

C: 0.42" (10.7mm)

See Mechanical Drawing for detailed dimensions

*Wire range only valid with use of a bus bar or staple.

"B2A" 2 AWG OEM, 2-14 AWG wire range and FLEX, 4-12 AWG, 25mm2-4mm2, wire class G-K including mm2 class 5,tin plated aluminum with steel screw, aluminum or copper wire, CU7AL, 75C temperature rating, single wire terminal, UL Recognized at 600v - acceptable for use through 2000v, CSA Certified. The most compact #2 AWG wire connector available.

Temperature Range and Rating Guide

Screwdriver Bit Information

90C (AL9CU) version available.

Please email for higher volume prices

115 Amps copper alloy bus cross section .25 x .04
or
.25 x .05 or 50 Amps bus 5/32" or

.25 x .032

Dimensions

A: 0.41" (10.4mm)

B: 0.56" (14.2mm)

C: 0.42" (10.7mm)

See Mechanical Drawing for detailed dimensions

*Wire range only valid with use of a bus bar or staple.

"B2A-HEX" 2 AWG OEM, 2-14 AWG wire range and FLEX, 4-12 AWG, 25mm2-4mm2, wire class G-K including mm2 class 5,tin plated aluminum with hex socket screw, aluminum or copper wire, CU7AL, 75C temperature rating, single wire terminal, UL Recognized at 600v - acceptable for use through 2000v, CSA Certified. The most compact #2 AWG wire connector available.

Temperature Range and Rating Guide

90C (AL9CU) version available.

Please email for higher volume prices

Dimensions

A: 0.41" (10.4mm)

B: 0.56" (14.2mm)

C: 0.42" (10.7mm)

See Mechanical Drawing for detailed dimensions

B2A-PCB: 2 AWG PCB wire lug, (2)3-14 AWG, 115A/100A AMP, slotted set screw. 2 legs (.24X.05”) with a 0.16" (4mm) PCB penetration. Side wire, and top screw entrance. UL Recognized at 600v - acceptable for use through 2000v. CSA certified. IHI® brand.

Temperature Range and Rating Guide

Screwdriver Bit Information

90C (AL9CU) version available.

Body and Staple THT Types

 Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. THT (Through Hole Technology). Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid copper bus staple for tens of micro ohms range of copper to copper high conductivity, low resistance current path.  Meets IEC volt drop test standards. Variety of THT leg length to accommodate PCB of various thicknesses including multilayer. 

Dimensions

A: 0.41" (10.4mm)

B: 0.56" (14.2mm)

C: 0.42" (10.7mm)

See Mechanical Drawing for detailed dimensions

B2A-PCB-HEX: 2 AWG PCB wire lug, 2(3)-14 AWG, 115A/100A AMP, HEX socket screw. 2 legs (.24X.05”) with a 0.16" (4mm) 0.16" (4mm) PCB penetration. Side wire, and top screw entrance. UL Recognized at 600v - acceptable for use through 2000v. CSA certified. IHI® brand.

Temperature Range and Rating Guide

90C (AL9CU) version available.

Body and Staple THT Types

 Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. THT (Through Hole Technology). Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid copper bus staple for tens of micro ohms range of copper to copper high conductivity, low resistance current path.  Meets IEC volt drop test standards. Variety of THT leg length to accommodate PCB of various thicknesses including multilayer. 

Dimensions

A: 0.41" (10.4mm)

B: 0.56" (14.2mm)

C: 0.42" (10.7mm)

See Mechanical Drawing for detailed dimensions

B2A-PCB-SS: 2 AWG PCB wire lug, 2(3)-14 AWG, 115A/100A AMP, stainless steel screw. 2 legs (.24X.05”) with a 0.16" (4mm) PCB penetration. Side wire, and top screw entrance. UL Recognized at 600v - acceptable for use through 2000v. CSA certified. IHI® brand.

Temperature Range and Rating Guide

Body and Staple THT Types

 Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. THT (Through Hole Technology). Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid copper bus staple for tens of micro ohms range of copper to copper high conductivity, low resistance current path.  Meets IEC volt drop test standards. Variety of THT leg length to accommodate PCB of various thicknesses including multilayer. Variety of THT leg length to accommodate PCB of various thicknesses including

multilayer. 

BUS BAR CUSTOMER SUPPLIED

Dimensions

A: 0.41" (10.4mm)

B: 0.56" (14.2mm)

C: 0.42" (10.7mm)

See Mechanical Drawing for detailed dimensions

B2A-NM-PCB-BUSMOUNT-HEX-KIT: 2 AWG PCB wire lug, 2-14 AWG, 115A/100A AMP, short HEX set screw. 2 legs (.24X.05”) with a 0.16" (4mm) PCB penetration.

Temperature Range and Rating Guide

Body and Staple THT Types

 Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. THT (Through Hole Technology). Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid copper bus staple for tens of micro ohms range of copper to copper high conductivity, low resistance current path.  Meets IEC volt drop test standards.

Dimensions

A: 0.41" (10.4mm)

B: 0.56" (14.2mm)

C: 0.42" (10.7mm)

See Mechanical Drawing for detailed dimensions

B2A-PCB-45: 2 AWG PCB wire lug, (2)3-14 AWG, 115A/100A AMP, Slotted set screw. 2 legs (.24X.05”) with a .09" (2.2mm) PCB penetration. Top wire, and screw entrance at 45 degrees. UL Recognized at 600v - acceptable for use through 2000v. CSA certified. IHI® brand.

Temperature Range and Rating Guide

Screwdriver Bit Information

90C (AL9CU) version available.

Body and Staple THT Types

 Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. THT (Through Hole Technology). Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid copper bus staple for tens of micro ohms range of copper to copper high conductivity, low resistance current path.  Meets IEC volt drop test standards. Variety of THT leg length to accommodate PCB of various thicknesses including multilayer. 

Dimensions

A: 0.41" (10.4mm)

B: 0.56" (14.2mm)

C: 0.42" (10.7mm)

See Mechanical Drawing for detailed dimensions

B2A-PCB-45-HEX: 2 AWG PCB wire lug, 2(3)-14 AWG, 115A/100A AMP, HEX socket screw. 2 legs (.24X.05”) with a .09" (2.2mm) PCB penetration. Top wire, and screw entrance at 45 degrees. UL Recognized at 600v - acceptable for use through 2000v. CSA certified. IHI® brand.

Temperature Range and Rating Guide

90C (AL9CU) version available.

Body and Staple THT Types

 Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. THT (Through Hole Technology). Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid copper bus staple for tens of micro ohms range of copper to copper high conductivity, low resistance current path.  Meets IEC volt drop test standards. Variety of THT leg length to accommodate PCB of various thicknesses including multilayer. 

Dimensions

A: 0.41" (10.4mm)

B: 0.56" (14.2mm)

C: 0.42" (10.7mm)

See Mechanical Drawing for detailed dimensions

B2A-PCB-45-150: 2 AWG PCB wire lug, 2(3)-14 AWG, 115A/100A AMP, steel screw. 2 legs (.24X.05”) with a 0.12" (3.0mm) PCB penetration. Top wire, and screw entrance at 45 degrees. UL Recognized at 600v - acceptable for use through 2000v. CSA certified. IHI® brand.

Temperature Range and Rating Guide

Screwdriver Bit Information

90C (AL9CU) version available.

Body and Staple THT Types

 Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. THT (Through Hole Technology). Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid copper bus staple for tens of micro ohms range of copper to copper high conductivity, low resistance current path.  Meets IEC volt drop test standards. Variety of THT leg length to accommodate PCB of various thicknesses including multilayer. 

Dimensions

A: 0.41" (10.4mm)

B: 0.56" (14.2mm)

C: 0.42" (10.7mm)

See Mechanical Drawing for detailed dimensions

B2A-PCB-150-HEX: 2 AWG PCB wire lug, (2)3-14 AWG, 115A/100A AMP, steel screw. 2 legs (.24X.05”) with a 0.12" (3.0mm) PCB penetration. Top wire, and screw entrance at 45 degrees. UL Recognized at 600v - acceptable for use through 2000v. CSA certified. IHI® brand.

Temperature Range and Rating Guide

90C (AL9CU) version available.

Body and Staple THT Types

 Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. THT (Through Hole Technology). Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid copper bus staple for tens of micro ohms range of copper to copper high conductivity, low resistance current path.  Meets IEC volt drop test standards. Variety of THT leg length to accommodate PCB of various thicknesses including multilayer. 

Dimensions

A: 0.41" (10.4mm)

B: 0.56" (14.2mm)

C: 0.42" (10.7mm)

See Mechanical Drawing for detailed dimensions

B2A-PCB-45-150-SS: 2 AWG PCB wire lug, (2)3-14 AWG, 115A/100A AMP, stainless steel screw. 2 legs (.24X.05”) with a 0.12" (3.0mm) PCB penetration. Top wire, and screw entrance at 45 degrees. UL Recognized at 600v - acceptable for use through 2000v. CSA certified. IHI® brand.

Temperature Range and Rating Guide

Body and Staple THT Types

 Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. THT (Through Hole Technology). Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid copper bus staple for tens of micro ohms range of copper to copper high conductivity, low resistance current path.  Meets IEC volt drop test standards. Variety of THT leg length to accommodate PCB of various thicknesses including multilayer. 

Dimensions

A: 0.41" (10.4mm)

B: 0.56" (14.2mm)

C: 0.42" (10.7mm)

See Mechanical Drawing for detailed dimensions

B2A-PCB-45-175: 2 AWG PCB wire lug, (2)3-14 AWG, 115A/100A AMP, slotted set screw. 2 legs (.24X.05”) with a 0.175" (4.4mm) PCB penetration. Top wire, and screw entrance at 45 degrees. UL Recognized at 600v - acceptable for use through 2000v. CSA certified. IHI® brand.

Temperature Range and Rating Guide

Screwdriver Bit Information

90C (AL9CU) version available.

Body and Staple THT Types

 Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. THT (Through Hole Technology). Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid copper bus staple for tens of micro ohms range of copper to copper high conductivity, low resistance current path.  Meets IEC volt drop test standards. Variety of THT leg length to accommodate PCB of various thicknesses including multilayer. 

Dimensions

A: 0.41" (10.4mm)

B: 0.56" (14.2mm)

C: 0.42" (10.7mm)

See Mechanical Drawing for detailed dimensions

B2A-PCB-45-175-HEX: 2 AWG PCB wire lug, (2)3-14 AWG, 115A/100A AMP, Hex socket screw. 2 legs (.24X.05”) with a 0.175" (4.4mm) PCB penetration. Top wire, and screw entrance at 45 degrees. UL Recognized at 600v - acceptable for use through 2000v. CSA certified. IHI® brand.

Temperature Range and Rating Guide

90C (AL9CU) version available.

Body and Staple THT Types

 Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. THT (Through Hole Technology). Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid copper bus staple for tens of micro ohms range of copper to copper high conductivity, low resistance current path.  Meets IEC volt drop test standards. Variety of THT leg length to accommodate PCB of various thicknesses including multilayer. 

Dimensions

A: 0.41" (10.4mm)

B: 0.56" (14.2mm)

C: 0.42" (10.7mm)

See Mechanical Drawing for detailed dimensions

B2A-PCB-45-175-SS: 2 AWG PCB wire lug, (2)3-14 AWG, 115A/100A AMP, slotted set screw. 2 legs (.24X.05”) with a 0.175" (4.4mm) PCB penetration. Top wire, and screw entrance at 45 degrees. UL Recognized at 600v - acceptable for use through 2000v. CSA certified. IHI® brand.

Temperature Range and Rating Guide

Body and Staple THT Types

 Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. THT (Through Hole Technology). Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid copper bus staple for tens of micro ohms range of copper to copper high conductivity, low resistance current path.  Meets IEC volt drop test standards. Variety of THT leg length to accommodate PCB of various thicknesses including multilayer. 

Dimensions

A: 0.41" (10.4mm)

B: 0.56" (14.2mm)

C: 0.85" (21.6mm)

See Mechanical Drawing for detailed dimensions

B2A-2PCB: 2 AWG PCB wire lug, (2)3-14 AWG, 115A/100A AMP (per lug shunted pair), (x2) Slotted set screws. 2 legs (.24X.05”), and 1 leg (.67x.05") with a 0.16" (4mm) PCB penetration. Side wire, and top screw entrance. UL Recognized at 600v - acceptable for use through 2000v. CSA certified. IHI® brand.

Temperature Range and Rating Guide

Screwdriver Bit Information

90C (AL9CU) version available.

Body and Staple THT Types

 Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. THT (Through Hole Technology). Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid copper bus staple for tens of micro ohms range of copper to copper high conductivity, low resistance current path.  Meets IEC volt drop test standards. 

Dimensions

A: 0.41" (10.4mm)

B: 0.56" (14.2mm)

C: 0.85" (21.6mm)

See Mechanical Drawing for detailed dimensions

B2A-2PCB-HEX: 2 AWG PCB wire lug, (2)3-14 AWG, 115A/100A AMP (per lug shunted pair), (x2) HEX socket screws. 2 legs (.24X.05”), and 1 leg (.67x.05") with a 0.16" (4mm) PCB penetration. Side wire, and top screw entrance. UL Recognized at 600v - acceptable for use through 2000v. CSA certified. IHI® brand.

Temperature Range and Rating Guide

90C (AL9CU) version available.

Body and Staple THT Types

 Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. THT (Through Hole Technology). Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid copper bus staple for tens of micro ohms range of copper to copper high conductivity, low resistance current path.  Meets IEC volt drop test standards. 

Dimensions

A: 0.47" (11.9mm)

B: 0.66" (16.8mm)

C: 0.41" (10.4mm)

See Mechanical Drawing for detailed dimensions

B2C-PCB: 2 AWG PCB wire lug, 2-14 AWG, 115A AMP, Slotted set screw. 2 legs (.24X.05”) with a 0.16" (4mm) PCB penetration. Side wire, and top screw entrance. UL Recognized at 600v - acceptable for use through 2000v. CSA certified. IHI® brand.

Temperature Range and Rating Guide

Screwdriver Bit Information

Body and Staple THT Types

 Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. THT (Through Hole Technology). Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid copper bus staple for tens of micro ohms range of copper to copper high conductivity, low resistance current path.  Meets IEC volt drop test standards. Variety of THT leg length to accommodate PCB of various thicknesses including multilayer.  

Dimensions

A: 0.47" (11.9mm)

B: 0.66" (16.8mm)

C: 0.41" (10.4mm)

See Mechanical Drawing for detailed dimensions

B2C-PCB-HEX: 2 AWG PCB wire lug, 2-14 AWG, 115A AMP, HEX socket screw. 2 legs (.24X.05”) with a 0.16" (4mm) PCB penetration. Side wire, and top screw entrance. UL Recognized at 600v - acceptable for use through 2000v. CSA certified. IHI® brand.

Temperature Range and Rating Guide

Body and Staple THT Types

 Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. THT (Through Hole Technology). Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid copper bus staple for tens of micro ohms range of copper to copper high conductivity, low resistance current path.  Meets IEC volt drop test standards. Variety of THT leg length to accommodate PCB of various thicknesses including multilayer. 

Dimensions

A: 0.47" (11.9mm)

B: 0.66" (16.8mm)

C: 0.41" (10.4mm)

See Mechanical Drawing for detailed dimensions

B2C-PCB-SS: 2 AWG PCB wire lug, 2-14 AWG, 115A AMP, Stainless Steel Slotted screw. 2 legs (.24X.05”) with a 0.16" (4mm) PCB penetration. Side wire, and top screw entrance. UL Recognized at 600v - acceptable for use through 2000v. CSA certified. IHI® brand.

Temperature Range and Rating Guide

Body and Staple THT Types

 Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. THT (Through Hole Technology). Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid copper bus staple for tens of micro ohms range of copper to copper high conductivity, low resistance current path.  Meets IEC volt drop test standards. Variety of THT leg length to accommodate PCB of various thicknesses including multilayer.