Quadruple Wire Lugs

Four wire, terminal, barrel, dual bolt mount, aluminum mechanical lugs.
UL and CSA Listed.

Search by Wire Size

10 AWG | 2 AWG | 1/0 AWG | 2/0 AWG | 250 kcmil | 350 kcmil

Approved for three and four wire applications. (Two #10, #12, or #14 wires acceptable. No mixing.)

Dimensions

A: 1.21" 30.7mm)

B: 0.56" (14.2mm)

C: 0.46" (11.7mm)

See Mechanical Drawing for detailed dimensions

"P2" 2 AWG splicer reducer wire lug, 2-14 AWG wire range, and FLEX, 4-12 AWG, 25mm2-4mm2, wire class G-K including mm2 class 5, singles, and multiples of wires: 2x #10, 2x #12 or 2x #14 wires, aluminum or copper wire, splicer or reducer CU7AL, 75C temperature rating, single #10 bolt cl/earance mounting hole or wire insertion "sight" hole, or wire stop hole, UL Listed at 600v - acceptable for use through 2000v. IHI® brand. Made in the USA from domestic and imported parts.

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

**TORK KRIMP® Method for clamping wires using uncrimped ferrules is protected under Patent No. 10630005. Full instructions for self crimping ferrules here.

E129884 UL486A,B, ZMVV,

MULTIPLES: 
(2) #10 AWG or
(2) #12 AWG or
(2) #14 AWG

with mounting or
"view" hole

Approved for three and four wire applications. (Two #10, #12, or #14 wires acceptable. No mixing.)

Dimensions

A: 1.21" 30.7mm)

B: 0.56" (14.2mm)

C: 0.46" (11.7mm)

See Mechanical Drawing for detailed dimensions

"P2-HEX" 2 AWG splicer reducer wire lug, 2-14 AWG wire range and FLEX, 4-12 AWG, 25mm2-4mm2, wire class G-K including mm2 class 5, singles, and multiples of wires: 2x #10, 2x #12 or 2x #14 wires, aluminum or copper wire, splicer or reducer CU7AL, 75C temperature rating, single #10 bolt cl/earance mounting hole or wire insertion "sight" hole, or wire stop hole, 1/8" Hex socket screw. UL Listed at 600v - acceptable for use through 2000v. IHI® brand. Made in the USA from domestic and imported parts.

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

**TORK KRIMP® Method for clamping wires using uncrimped ferrules is protected under Patent No. 10630005. Full instructions for self crimping ferrules here.

E129884 UL486A,B, ZMVV,

MULTIPLES: 
(2) #10 AWG or
(2) #12 AWG or
(2) #14 AWG

with mounting or
"view" hole

Assembly PDF

Dual Interlocking Lugs/ Eight Wire Application

Hardware not included. Lugs sold individually.

Dimensions

A: 1.16" (29.4mm)

B: 0.56" (14.3mm)

C: 2.06" (52.4mm)

L: 1.06" (27.0mm)

See Mechanical Drawing for detailed dimensions

"4S2-HEX" 2 AWG Quadruple wire lug, 2-14 AWG wire range, and FLEX, 4-12 AWG, 25mm2-4mm2, wire class G-K including mm2 class 5, four barrel, aluminum or copper wire, CU9AL, 90C temperature rating, two 5/16" (8mm) dia. bolt mounting holes, UL Listed at 600v - acceptable for use through 2000v, CSA Certified. Made in the USA from domestic and imported parts. International Hydraulics Inc.® brand.

	DIY Mounting Holes™: Cat. No. S2 Style No. ALL
CSA and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the 4S2-HEX Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

WIRE CONNECTORS AND SOLDERING LUGS (ZMVV)

INSTALLATION

Wire connectors are intended for use in installations covered by ANSI/NFPA 70, ‘‘National Electrical Code’’ (NEC), and should be installed using the prescribed manufacturer’s installation instructions.

"Stacking of connectors (multiple connectors assembled using a single bolt, nut and washers) may be permitted where mechanical interference is reduced or eliminated with the use of offset tangs, stacking adapters, and the like. The surface contact area of the mounting tang should make completecontact with the mounting surface or the previously stacked connector tang."

Ref. UL White Book ZMVV section

ZMVV UL Whitebook Installation Information

UL & CSA Approved for FLEX wire Class G-K sizes #1/0-#14 AWG
Use of Ferrules (UL Listed) on wires 1/0-14 AWG

**TORK KRIMP® Method for clamping wires using uncrimped ferrules is protected under Patent No. 10630005. Full instructions for self crimping ferrules here.

Assembly PDF Dual Interlocking Lugs/ Four Wire Application   Hardware not included. Lugs sold individually.

Dimensions

A: 1.16" (29.4mm)

B: 0.56" (14.3mm)

C: 1.00" (25.4mm)

See Mechanical Drawing for detailed dimensions

"2S2" 2 AWG double wire lug 2-14 AWG wire range, and FLEX, 4-12 AWG, 25mm2-4mm2, wire class G-K including mm2 class 5, 2 barrel, aluminum or copper wire, CU9AL, 90C temperature rating, single 5/16" (8mm) dia. bolt mounting hole, UL Listed at 600v - acceptable for use through 2000v, CSA Certified. Made in the USA from domestic and imported parts.

	DIY Mounting Holes™: Cat. No. S2 Style No. ALL
CSA and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the 2S2 Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

WIRE CONNECTORS AND SOLDERING LUGS (ZMVV)

INSTALLATION

Wire connectors are intended for use in installations covered by ANSI/NFPA 70, ‘‘National Electrical Code’’ (NEC), and should be installed using the prescribed manufacturer’s installation instructions.

"Stacking of connectors (multiple connectors assembled using a single bolt, nut and washers) may be permitted where mechanical interference is reduced or eliminated with the use of offset tangs, stacking adapters, and the like. The surface contact area of the mounting tang should make completecontact with the mounting surface or the previously stacked connector tang."

Ref. UL White Book ZMVV section

ZMVV UL Whitebook Installation Information

UL & CSA Approved for FLEX wire Class G-K sizes #1/0-#14 AWG
Use of Ferrules (UL Listed) on wires 1/0-14 AWG

**TORK KRIMP® Method for clamping wires using uncrimped ferrules is protected under Patent No. 10630005. Full instructions for self crimping ferrules here.

Dimensions

A: 1.63" (41.4mm)

B: 0.56" (14.2mm)

C: 1.00" (25.4mm)

L: 0.50" (12.7mm)

See Mechanical Drawing for detailed dimensions

"S2-NB-2" 2 AWG quadruple wire lug, Four 4 barrel /wires (4) 2-14AWG wire range, and FLEX, 4-12 AWG, 25mm2-4mm2, wire class G-K including mm2 class 5, slotted screws, Grounding or Power Distribution or Power Collection Lug.UL Listed for General Use including grounding in dry locations. Up to Four wires (4 conductors) aluminum or copper wire, CU9AL, 90C temperature rating, two (2) #10 Bolt mounting holes , UL Listed at 600v - acceptable for use through 2000v, CSA Certified. IHI® brand. Made in the USA from domestic and imported parts.
Total current rating with 4 full size copper wires 460 Amps (75C).

Power and grounding use UL Listed lug, wire rated current capacity.

	DIY Mounting Holes™: Cat. No. S2 Style No. ALL
CSA and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the S2-NB-2 Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

**TORK KRIMP® Method for clamping wires using uncrimped ferrules is protected under Patent No. 10630005. Full instructions for self crimping ferrules here.

Dimensions

A: 1.63" (41.4mm)

B: 0.56" (14.2mm)

C: 1.00" (25.4mm)

L: 0.50" (12.7mm)

See Mechanical Drawing for detailed dimensions

"S2-NB-2-HEX" 2 AWG guadruple wire lug, Four 4 barrel /wires (4) 2-14AWG wire range, and FLEX, 4-12 AWG, 25mm2-4mm2, wire class G-K including mm2 class 5, Grounding or Power Distribution or Power Collection Lug. UL Listed for General Use including grounding in dry locations. Up to Four wires (4 conductors) aluminum or copper wire, CU9AL, 90C temperature rating, two (2) #10 Bolt mounting holes , UL Listed at 600v - acceptable for use through 2000v, CSA Certified. IHI® brand. Made in the USA from domestic and imported parts.
Total current rating with 4 full size copper wires 460 Amps (75C).

Power and grounding use UL Listed lug, wire rated current capacity.

	DIY Mounting Holes™: Cat. No. S2 Style No. ALL
CSA and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the S2-NB-2-HEX Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

**TORK KRIMP® Method for clamping wires using uncrimped ferrules is protected under Patent No. 10630005. Full instructions for self crimping ferrules here.

Four wire application

Assembly PDF

Dual/Interlocking Lugs

7-9 Wire Application

2S1/0 and 3S6-2S4-HEX

Hardware not included.

Lugs sold individually.

Dimensions

A: 1.47" (37.3mm)

B: 0.81" (20.7mm)

C: 1.13" (28.6mm)

See Mechanical Drawing for detailed dimensions

"2S1/0" 1/0 AWG double wire lug, 1/0-14 AWG wire range, and multiple (dual) wires and FLEX wire, 1-8 AWG, class G-K including mm2 class 5, double barrel, aluminum or copper wire, CU9AL, 90C temperature rating, single 1/4" bolt mounting hole, UL Listed at 600v - acceptable for use through 2000v, CSA Certified. Made in the USA from domestic and imported parts.

UL & CSA Approved for Multiple Wires 2X #14 to 2X #6 and FLEX wire Class G-K sizes #1-#8 AWG
Use of Ferrules (UL Listed) on wires 1-8 AWG

	DIY Mounting Holes™: Cat. No. 2S1/0 Style No. ALL
CSA and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the 2S1/0 Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

WIRE CONNECTORS AND SOLDERING LUGS (ZMVV)

INSTALLATION

Wire connectors are intended for use in installations covered by ANSI/NFPA 70, ‘‘National Electrical Code’’ (NEC), and should be installed using the prescribed manufacturer’s installation instructions.

"Stacking of connectors (multiple connectors assembled using a single bolt, nut and washers) may be permitted where mechanical interference is reduced or eliminated with the use of offset tangs, stacking adapters, and the like. The surface contact area of the mounting tang should make completecontact with the mounting surface or the previously stacked connector tang."

Ref. UL White Book ZMVV section

ZMVV UL Whitebook Installation Information

Approved for up to 4 wires

Assembly PDF

Dual/Interlocking Lugs

7-9 Wire Application

2S1/0-HEX and 3S6-2S4-HEX

Hardware not included.

Lugs sold individually.

Dimensions

A: 1.47" (37.3mm)

B: 0.81" (20.7mm)

C: 1.13" (28.6mm)

See Mechanical Drawing for detailed dimensions

"2S1/0-HEX" 1/0 AWG double wire lug, 1/0-14 AWG wire range, and multiple (dual) wires and FLEX wire, 1-8 AWG, class G-K including mm2 class 5, double barrel, aluminum or copper wire, CU9AL, 90C temperature rating, single 1/4" bolt mounting hole, UL Listed at 600v - acceptable for use through 2000v, CSA Certified. 3/16" Hex Socket Screw. Made in the USA from domestic and imported parts.

UL & CSA Approved for Multiple Wires 2X #14 to 2X #6 and FLEX wire Class G-K sizes #1-#8 AWG
Use of Ferrules (UL Listed) on wires 1-8 AWG

	DIY Mounting Holes™: Cat. No. 2S1/0 Style No. ALL
CSA and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the 2S1/0-HEX Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

WIRE CONNECTORS AND SOLDERING LUGS (ZMVV)

INSTALLATION

Wire connectors are intended for use in installations covered by ANSI/NFPA 70, ‘‘National Electrical Code’’ (NEC), and should be installed using the prescribed manufacturer’s installation instructions.

"Stacking of connectors (multiple connectors assembled using a single bolt, nut and washers) may be permitted where mechanical interference is reduced or eliminated with the use of offset tangs, stacking adapters, and the like. The surface contact area of the mounting tang should make completecontact with the mounting surface or the previously stacked connector tang."

Ref. UL White Book ZMVV section

ZMVV UL Whitebook Installation Information

Approved for up to 4 wires

Assembly PDF

Dual/Interlocking Lugs

7-9 Wire Application

2S1/0-HEX-M and 3S6-2S4-HEX-M

Dimensions

A: 1.47" (37.3mm)

B: 0.81" (20.7mm)

C: 1.13" (28.6mm)

See Mechanical Drawing for detailed dimensions

Note!!!   This part has a 5mm hex socket for use in metric countries.

"2S1/0-HEX-M" 1/0 AWG double wire lug, 1/0-14 AWG wire range, and multiple (dual) wires and FLEX wire, 1-8 AWG, class G-K including mm2 class 5, double barrel, aluminum or copper wire, CU9AL, 90C temperature rating, single 1/4" bolt mounting hole, UL Listed at 600v - acceptable for use through 2000v, CSA Certified. 5mm Hex Socket Screw. Made in the USA from domestic and imported parts.

UL & CSA Approved for Multiple Wires 2X #14 to 2X #6 and FLEX wire Class G-K sizes #1-#8 AWG
Use of Ferrules (UL Listed) on wires 1-8 AWG, Also class 2 & 5 mm2 sizes single and dual per rating label.

	DIY Mounting Holes™: Cat. No. 2S1/0 Style No. ALL
CSA and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the 2S1/0-HEX-M Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

Assembly PDF Dual Interlocking Lugs/ Four Wire Application   Hardware not included. Lugs sold individually.

Dimensions

A: 1.47" (37.3mm)

B: 0.81" (20.7mm)

C: 1.20" (30.6mm)

L: 0.64" (16.3mm)

See Mechanical Drawing for detailed dimensions

"2S2/0-31-42" 2/0 AWg double wire lug 2/0-14 AWG wire range, and FLEX wire, 1/0-14 AWG, class G-K including mm2 class 5, 2 barrel, aluminum or copper wire, CU9AL, 90C temperature rating, TURN PREVENT USING TWO 1/4" bolts (hole is .315 +/-.007) mounting holes, UL Listed at 600v - acceptable for use through 2000v, CSA Certified. Made in the USA from domestic and imported parts.

	DIY Mounting Holes™: Cat. No. 2S1/0 Style No. 3
CSA and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the 2S1/0-31-42 Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

WIRE CONNECTORS AND SOLDERING LUGS (ZMVV)

INSTALLATION

Wire connectors are intended for use in installations covered by ANSI/NFPA 70, ‘‘National Electrical Code’’ (NEC), and should be installed using the prescribed manufacturer’s installation instructions.

"Stacking of connectors (multiple connectors assembled using a single bolt, nut and washers) may be permitted where mechanical interference is reduced or eliminated with the use of offset tangs, stacking adapters, and the like. The surface contact area of the mounting tang should make completecontact with the mounting surface or the previously stacked connector tang."

Ref. UL White Book ZMVV section

ZMVV UL Whitebook Installation Information

UL & CSA Approved for FLEX wire Class G-K sizes #1/0-#14 AWG
Use of Ferrules (UL Listed) on wires 1/0-14 AWG

Assembly PDF Dual Interlocking Lugs/ Four Wire Application   Hardware not included. Lugs sold individually.

Dimensions

A: 1.47" (37.3mm)

B: 0.81" (20.7mm)

C: 1.20" (30.6mm)

L: 0.64" (16.3mm)

See Mechanical Drawing for detailed dimensions

"2S2/0-31-42-HEX" 2/0 AWG double wire lug 2/0-14 AWG wire range, and FLEX wire, 1/0-14 AWG, class G-K including mm2 class 5, 2 barrel, aluminum or copper wire, CU9AL, 90C temperature rating, TURN PREVENT USING TWO 1/4" bolts (hole is .315 +/-.007) mounting holes, UL Listed at 600v - acceptable for use through 2000v, CSA Certified. Made in the USA from domestic and imported parts.

	DIY Mounting Holes™: Cat. No. 2S1/0 Style No. 3
CSA and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the 2S1/0-31-42-HEX Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

WIRE CONNECTORS AND SOLDERING LUGS (ZMVV)

INSTALLATION

Wire connectors are intended for use in installations covered by ANSI/NFPA 70, ‘‘National Electrical Code’’ (NEC), and should be installed using the prescribed manufacturer’s installation instructions.

"Stacking of connectors (multiple connectors assembled using a single bolt, nut and washers) may be permitted where mechanical interference is reduced or eliminated with the use of offset tangs, stacking adapters, and the like. The surface contact area of the mounting tang should make completecontact with the mounting surface or the previously stacked connector tang."

Ref. UL White Book ZMVV section

ZMVV UL Whitebook Installation Information

UL & CSA Approved for FLEX wire Class G-K sizes #1/0-#14 AWG
Use of Ferrules (UL Listed) on wires 1/0-14 AWG

Assembly PDF Dual Interlocking Lugs/ Four Wire Application   Hardware not included. Lugs sold individually.

Dimensions

A: 1.47" (37.3mm)

B: 0.81" (20.7mm)

C: 1.20" (30.6mm)

L: 0.64" (16.3mm)

See Mechanical Drawing for detailed dimensions

"2S2/0-31-42-HEX-M" 2/0 AWG metric double wire lug, 2/0-14 AWG wire range, and FLEX wire, 1/0-14 AWG, class G-K including mm2 class 5, double barrel, aluminum or copper wire, CU9AL, 90C temperature rating, TURN PREVENT USING TWO 1/4" bolts (hole is .315 +/-.007) mounting holes, UL Listed at 600v - acceptable for use through 2000v, CSA Certified. Made in the USA from domestic and imported parts.

	DIY Mounting Holes™: Cat. No. 2S1/0 Style No. 3
CSA and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the 2S1/0-31-42-HEX-M Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

WIRE CONNECTORS AND SOLDERING LUGS (ZMVV)

INSTALLATION

Wire connectors are intended for use in installations covered by ANSI/NFPA 70, ‘‘National Electrical Code’’ (NEC), and should be installed using the prescribed manufacturer’s installation instructions.

"Stacking of connectors (multiple connectors assembled using a single bolt, nut and washers) may be permitted where mechanical interference is reduced or eliminated with the use of offset tangs, stacking adapters, and the like. The surface contact area of the mounting tang should make complete contact with the mounting surface or the previously stacked connector tang."

Ref. UL White Book ZMVV section

ZMVV UL Whitebook Installation Information

UL & CSA Approved for FLEX wire Class G-K sizes #1/0-#14 AWG
Use of Ferrules (UL Listed) on wires 1/0-14 AWG

Approved for two to four wire use (two wires per barrel)

Dimensions

A: 2.50" (63.5mm)

B: 1.13" (28.7mm)

C: 0.83" (21.1mm)

See Mechanical Drawing for detailed dimensions

Approved for two to four wire use (two wires per barrel)

Dimensions

A: 4.00" (101.6mm)

B: 1.13" (28.7mm)

C: 0.83" (21.1mm)

See Mechanical Drawing for detailed dimensions

4 wires

3 wires

Dimensions

A: 2.56" (65.1mm)

B: 1.19" (30.2mm)

C: 1.63" (41.3mm)

See Mechanical Drawing for detailed dimensions

Compact Multi-Wire Lug
to hold 3 or 4 wires

"2S250" dual: 250 kcmil (4/0 AWG)-6 AWG wire range, and FLEX wire, 3/0-6 AWG, class G-K including mm2 class 5, standard copper wire only, and can hold up to 4 wires, 2 per wire hole. CU9AL (250kcmli wire lug), 90C temperature rating, single 3/8" bolt mounting hole, UL Listed at 600v - acceptable for use through 2000v, CSA Certified. Made in the USA from domestic and imported parts.

	DIY Mounting Holes™: Cat. No. 2S250 Style No. 1
CSA and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the 2S250 Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

Assembly PDF

Dual/Interlocking Lugs Eight Wire Application

Hardware not included.

Lugs sold individually.

Dimensions

A: 3.98" (101.1mm)

B: 1.25" (31.8mm)

C: 2.88" (73.2mm)

L: 1.75" (44.5mm)

See Mechanical Drawing for detailed dimensions

"4S350-56-88-HEX" 350 kcmil quadruple wire panelboard lug, 350kcmil-6 AWG wire range, and FLEX wire, 262 kcmil-2 AWG, class G-K including mm2 class 5, panel Lug. Four barrel / wires (4 conductors) aluminum or copper wire, CU9AL, 90C temperature rating, two 1/2" bolt mounts at 1 3/4" or at 2" centers. UL Listed at 600v - acceptable for use through 2000v, CSA Certified. IHI® brand. Made in the USA from domestic and imported parts.

	DIY Mounting Holes™: Cat. No. 2S350 Style No. ALL
CSA and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the 4S350-56-88-HEX Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

Dimensions

A: 2.50" (63.5mm)

B: 1.50" (38.1mm)

C: 2.22" (56.4mm)

See Mechanical Drawing for detailed dimensions

"2P500" 500 kcmil splicer reducer wire lug, 500kcmil-6 AWG wire range, aluminum or copper wire, splicer or reducer CU7AL, 75C temperature rating, two mounting holes, for mounting to insulator from bottom if needed, or wire insertion "sight" holes, or wire stop hole, UL Listed at 600v - acceptable for use through 2000v. Hex socket screws. IHI® brand. Made in the USA from domestic and imported parts.

Quad Splicer Reducer Distribution

3X or 4 X 500kcmil-6AWG wires (see part P500 for 2X)

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.