Dimensions

A: 1.06" (27.0mm)

B: 0.50" (12.7mm)

C: 0.38" (9.5mm)

See Mechanical Drawing for detailed dimensions

"S6" 6 AWG Single wire lug, 6-14 AWG wire range, 3/8" wide, single barrel, aluminum or copper wire, CU9AL, 90C temperature rating, one mounting hole , UL Listed at 600v - acceptable for use through 2000v, CSA Certified. 1/4" dia. mounting bolt hole. IHI® brand.

	DIY Mounting Holes™: Cat. No. S6 Style No. ALL
CSA and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the S6 Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

Dimensions

A: 1.06" (27.0mm)

B: 0.50" (12.7mm)

C: 0.38" (9.5mm)

See Mechanical Drawing for detailed dimensions

"S6-203" 6 AWG Single wire lug, 6-14 AWG wire range , 3/8" wide, single barrel, aluminum or copper wire, CU9AL, 90C temperature rating, one mounting hole , UL Listed at 600v - acceptable for use through 2000v, CSA Certified. 0.203 dia. #10 or M5 mounting bolt hole. IHI® brand.

	DIY Mounting Holes™: Cat. No. S6 Style No. ALL
CSA and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the S6-203 Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

Dimensions

A: 1.06" (27.0mm)

B: 0.50" (12.7mm)

C: 0.50" (12.7mm)

See Mechanical Drawing for detailed dimensions

"S6W" 6 AWG Single wire lug, 6-14 AWG wire range , 1/2" wide, single barrel, aluminum or copper wire, CU9AL, 90C temperature rating, one mounting hole , UL Listed at 600v - acceptable for use through 2000v, CSA Certified. 1/4" mounting bolt hole. IHI® brand.

	DIY Mounting Holes™: Cat. No. S6 Style No. ALL
CSA and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the S6W Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

Dimensions

A: 1.06" (27.0mm)

B: 0.50" (12.7mm)

C: 0.50" (12.7mm)

See Mechanical Drawing for detailed dimensions

"S4" 4 AWG Single wire lug, 4-14 AWG wire range FLEX, 10-14 AWG, wire class G-K including mm2 class 5, only with use of UL listed ferrule, 1/2" wide, single barrel, aluminum or copper wire, CU9AL, 90C temperature rating, one mounting hole , UL Listed at 600v - acceptable for use through 2000v, CSA Certified. 1/4" mounting bolt hole. IHI® brand.

	DIY Mounting Holes™: Cat. No. S4 Style No. ALL
CSA and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the S4 Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

Dimensions

A: 1.16" (29.4mm)

B: 0.56" (14.8mm)

C: 0.50" (12.7mm)

See Mechanical Drawing for detailed dimensions

"S2" 2 AWG Single wire lug, 2-14 AWG wire range, FLEX 4-12 AWG, wire class G-K including mm2 class 5, single barrel, aluminum or copper wire, CU9AL, 90C temperature rating, one mounting hole, UL Listed at 600v - acceptable for use through 2000v, CSA Certified. 1/4" mounting bolt hole. IHI® brand. "Drop-In" Replacement for Homac A-90 and Panduit LAMA2-14-Q.

Screwdriver Bit Information

	DIY Mounting Holes™: Cat. No. S2 Style No. ALL
CSA and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the S2 Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

**TORK KRIMP® Method for clamping wires using uncrimped ferrules is protected under Patent No. 10630005. Full instructions for self crimping ferrules here.

Dimensions

A: 1.16" (29.4mm)

B: 0.56" (14.8mm)

C: 0.50" (12.7mm)

See Mechanical Drawing for detailed dimensions

"S2-HEX" 2 AWG Single wire lug, 2-14 AWG wire range, FLEX, 4-12 AWG, wire class G-K including mm2 class 5, single barrel, aluminum or copper wire, CU9AL, 90C temperature rating, universal Hex socket wire screw 4mm & 5/32" across flats key. UL Listed at 600v - acceptable for use through 2000v, CSA Certified. One 1/4" bolt (6mm) mounting bolt hole. IHI® brand.

	DIY Mounting Holes™: Cat. No. S2 Style No. ALL
CSA and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the S2-HEX Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

**TORK KRIMP® Method for clamping wires using uncrimped ferrules is protected under Patent No. 10630005. Full instructions for self crimping ferrules here.

Dimensions

A: 1.16" (29.4mm)

B: 0.56" (14.8mm)

C: 0.50" (12.7mm)

See Mechanical Drawing for detailed dimensions

"S2-171" 2 AWG Single wire lug, 2-14 AWG wire range, FLEX, 4-12 AWG, wire class G-K including mm2 class 5, single barrel, small Mounting hole Version (.171" dia.) #8 screw or rivet for PCB mount and other specialty applications. Slotted Set Screw. aluminum or copper wire, CU9AL, 90C temperature rating, one mounting hole , UL Listed at 600v - acceptable for use through 2000v, CSA Certified. IHI® brand.

Screwdriver Bit Information

	DIY Mounting Holes™: Cat. No. S2 Style No. ALL
CSA and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the S2-171 Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

**TORK KRIMP® Method for clamping wires using uncrimped ferrules is protected under Patent No. 10630005. Full instructions for self crimping ferrules here.

Dimensions

A: 1.16" (29.4mm)

B: 0.56" (14.8mm)

C: 0.50" (12.7mm)

See Mechanical Drawing for detailed dimensions

"S2-171-HEX" 2 AWG Single wire lug, 2-14 AWG wire range, FLEX, 4-12 AWG, wire class G-K including mm2 class 5, single barrel, small Mounting hole Version (.171" dia.) #8 screw or rivet for PCB mount and other specialty applications. Hex Socket Screw. aluminum or copper wire, CU9AL, 90C temperature rating, one mounting hole, UL Listed at 600v - acceptable for use through 2000v, CSA Certified. IHI® brand.

	DIY Mounting Holes™: Cat. No. S2 Style No. ALL
CSA and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the S2-171-HEX Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

**TORK KRIMP® Method for clamping wires using uncrimped ferrules is protected under Patent No. 10630005. Full instructions for self crimping ferrules here.

Dimensions

A: 1.16" (29.4mm)

B: 0.56" (14.8mm)

C: 0.50" (12.7mm)

See Mechanical Drawing for detailed dimensions

"S2-171-13627" 2 AWG Single wire lug, 2-14 AWG wire range, Multiple (dual) wire class B/C and FLEX, 4-12 AWG, 25mm2-4mm2, wire class G-K including mm2 class 5, single barrel, small Mounting hole Version (.171" dia.) #8 screw or rivet for PCB mount and other specialty applications. Aluminum Hex Socket Screw. aluminum or copper wire, CU9AL, 90C temperature rating, one mounting hole, UL Listed at 600v - acceptable for use through 2000v, CSA Certified. International Hydraulics Inc.

Steel screw option available.

	DIY Mounting Holes™: Cat. No. S2 Style No. ALL
CSA and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the S2-171-13627 Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

**TORK KRIMP® Method for clamping wires using uncrimped ferrules is protected under Patent No. 10630005. Full instructions for self crimping ferrules here.

Dimensions

A: 1.16" (29.4mm)

B: 0.56" (14.8mm)

C: 0.50" (12.7mm)

I: 0.26" (6.6mm)

See Mechanical Drawing for detailed dimensions

"S2-TP" 2 AWG Single wire lug, 2-14 AWG wire range, FLEX, 4-12 AWG, wire class G-K including mm2 class 5, single barrel, aluminum or copper wire, CU9AL, 90C temperature rating, one mounting hole with anti-rotation rib(turn prevent) , Slotted Screw, UL Listed at 600v - acceptable for use through 2000v, CSA Certified. 1/4" bolt. IHI® brand. Made in USA.

Screwdriver Bit Information

	DIY Mounting Holes™: Cat. No. S2 Style No. ALL
CSA and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the S2-TP Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

**TORK KRIMP® Method for clamping wires using uncrimped ferrules is protected under Patent No. 10630005. Full instructions for self crimping ferrules here.

Dimensions

A: 1.16" (29.4mm)

B: 0.56" (14.8mm)

C: 0.50" (12.7mm)

I: 0.26" (6.6mm)v

See Mechanical Drawing for detailed dimensions

"S2-TP-HEX" 2 AWG Single wire lug, 2-14 AWG wire range, FLEX, 4-12 AWG, wire class G-K including mm2 class 5, single barrel, aluminum or copper wire, CU9AL, 90C temperature rating, one mounting hole with anti-rotation rib(turn prevent) , hex socket set screw, UL Listed at 600v - acceptable for use through 2000v, CSA Certified. 1/4" bolt. IHI Connectors® brand. Made in the USA from domestic and imported parts.

	DIY Mounting Holes™: Cat. No. S2 Style No. ALL
CSA and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the S2-TP-HEX Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

**TORK KRIMP® Method for clamping wires using uncrimped ferrules is protected under Patent No. 10630005. Full instructions for self crimping ferrules here.

Approved for two wire use

Assembly PDF

Dual Interlocking Lugs/

Three Wire Application

2S1/0 and S1/0

Assembly PDF

Dual/Interlocking Lugs

6-7 Wire Application

S1/0 and 3S6-2S4-HEX

Hardware not included.

Lugs sold individually.

Dimensions

A: 1.47" (37.3mm)

B: 0.81" (20.6mm)

C: 0.63" (15.9mm)

See Mechanical Drawing for detailed dimensions

"S1/0" 1/0 AWG Single wire lug, 1/0-14 AWG wire range, Multiple (dual) wire class B/C and FLEX, AWG 1-8, wire class G-K including mm2 including mm2 class 5, single barrel, aluminum or copper wire, CU9AL, 90C temperature rating, one mounting hole, slotted screw, UL Listed at 600v - acceptable for use through 2000v, CSA Certified. 1/4" bolt mounting hole. Stacking, nesting, and interlocking lugs permitted under UL White book ZMVV. IHI® brand. "Drop-In" Replacement for Homac A-125 and Panduit LAMA1/0-14-Q.

	DIY Mounting Holes™: Cat. No. S1/0 Style No. 1,5
CSA and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the S1/0 Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

WIRE CONNECTORS AND SOLDERING LUGS (ZMVV)

INSTALLATION

Wire connectors are intended for use in installations covered by ANSI/NFPA 70, ‘‘National Electrical Code’’ (NEC), and should be installed using the prescribed manufacturer’s installation instructions.

"Stacking of connectors (multiple connectors assembled using a single bolt, nut and washers) may be permitted where mechanical interference is reduced or eliminated with the use of offset tangs, stacking adapters, and the like. The surface contact area of the mounting tang should make complete contact with the mounting surface or the previously stacked connector tang."

Ref. UL White Book ZMVV section

ZMVV UL Whitebook Installation Information

Approved for two wire use

Assembly PDF

Dual Interlocking Lugs/

Three Wire Application

2S1/0 and S1/0

Assembly PDF

Dual/Interlocking Lugs

6-7 Wire Application

S1/0 and 3S6-2S4-HEX

Hardware not included.

Lugs sold individually.

Dimensions

A: 1.47" (37.3mm)

B: 0.81" (20.6mm)

C: 0.63" (15.9mm)

See Mechanical Drawing for detailed dimensions

"S1/0-HEX" 1/0 AWG Single wire lug, 1/0-14 AWG wire range, Multiple (dual) class B/C and FLEX wire, 1-8 AWG, class G-K including mm2 class 5, single barrel, aluminum or copper wire, CU9AL, 90C temperature rating, one mounting hole, 3/16" A/F Hex Socket Drive screw, UL Listed at 600v - acceptable for use through 2000v, CSA Certified. 1/4" bolt mounting hole. Stacking, nesting, and interlocking lugs permitted under UL White book ZMVV. IHI® brand.

	DIY Mounting Holes™: Cat. No. S1/0 Style No. 1,5
CSA and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the S1/0-HEX Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

WIRE CONNECTORS AND SOLDERING LUGS (ZMVV)

INSTALLATION

Wire connectors are intended for use in installations covered by ANSI/NFPA 70, ‘‘National Electrical Code’’ (NEC), and should be installed using the prescribed manufacturer’s installation instructions.

"Stacking of connectors (multiple connectors assembled using a single bolt, nut and washers) may be permitted where mechanical interference is reduced or eliminated with the use of offset tangs, stacking adapters, and the like. The surface contact area of the mounting tang should make complete contact with the mounting surface or the previously stacked connector tang."

Ref. UL White Book ZMVV section

ZMVV UL Whitebook Installation Information

Approved for two wire use

Assembly PDF

Dual Interlocking Lugs/

Three Wire Application

2S1/0 and S1/0

Assembly PDF

Dual/Interlocking Lugs

6-7 Wire Application

S1/0 and 3S6-2S4-HEX

Hardware not included.

Lugs sold individually.

Dimensions

A: 1.47" (37.3mm)

B: 0.81" (20.6mm)

C: 0.63" (15.9mm)

See Mechanical Drawing for detailed dimensions

Note!!!   This part has a 5mm hex socket for use in metric countries.

"S1/0-HEX-M" 1/0 AWG metric single wire lug, 1/0-14 AWG wire range, Multiple (dual) Class B/C wires, and FLEX wire, 1-8 AWG, class G-K including mm2 class 5, single barrel, aluminum or copper wire, CU9AL, 90C temperature rating, one mounting hole, METRIC 5mm Hex Socket screw, UL Listed at 600v - acceptable for use through 2000v, CSA Certified. 1/4" or 6mm bolt mounting hole. Stacking, nesting, and interlocking lugs permitted under UL White book ZMVV. IHI® brand.

	DIY Mounting Holes™: Cat. No. S1/0 Style No. 1,5
CSA and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the S1/0-HEX-M Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

WIRE CONNECTORS AND SOLDERING LUGS (ZMVV)

INSTALLATION

Wire connectors are intended for use in installations covered by ANSI/NFPA 70, ‘‘National Electrical Code’’ (NEC), and should be installed using the prescribed manufacturer’s installation instructions.

"Stacking of connectors (multiple connectors assembled using a single bolt, nut and washers) may be permitted where mechanical interference is reduced or eliminated with the use of offset tangs, stacking adapters, and the like. The surface contact area of the mounting tang should make complete contact with the mounting surface or the previously stacked connector tang."

Ref. UL White Book ZMVV section

ZMVV UL Whitebook Installation Information

Approved for two wire use

Assembly PDF

Dual Interlocking Lugs/ 2-4 Wire Application

Hardware not included.

Lugs sold individually.

For more interlocking lugs

click here.

Dimensions

A: 1.47" (37.3mm)

B: 0.81" (20.6mm)

C: 0.63" (15.9mm)

See Mechanical Drawing for detailed dimensions

"S1/0-34-41" 1/0 AWG Single wire lug, 1/0-14 AWG wire range, Multiple (dual) wire class B/C and FLEX, AWG 1-8, wire class G-K including mm2 including mm2 class 5, single barrel, aluminum or copper wire, CU9AL, 90C temperature rating, one mounting hole, slotted screw, UL Listed at 600v - acceptable for use through 2000v, CSA Certified. 5/16" bolt mounting hole. Stacking, nesting, and interlocking lugs permitted under UL White book ZMVV. IHI Connectors® brand. Made in the USA from domestic and imported parts.

UL & CSA Approved for Multiple Wires 2X #14 to 2X #4 and (1X) FLEX wire Class G-K sizes #1-#8 AWG
Use of Ferrules (UL Listed) on wires 1-8 AWG

	DIY Mounting Holes™: Cat. No. S1/0 Style No. 1,5
CSA and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the S1/0-34-41 Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

WIRE CONNECTORS AND SOLDERING LUGS (ZMVV)

INSTALLATION

Wire connectors are intended for use in installations covered by ANSI/NFPA 70, ‘‘National Electrical Code’’ (NEC), and should be installed using the prescribed manufacturer’s installation instructions.

"Stacking of connectors (multiple connectors assembled using a single bolt, nut and washers) may be permitted where mechanical interference is reduced or eliminated with the use of offset tangs, stacking adapters, and the like. The surface contact area of the mounting tang should make complete contact with the mounting surface or the previously stacked connector tang."

Ref. UL White Book ZMVV section

ZMVV UL Whitebook Installation Information

Approved for two wire use

Dimensions

A: 1.46" (37.3mm)

B: 0.77" (19.0mm)

C: 0.64" (16.3mm)

I: 0.75" (19.1mm)

See Mechanical Drawing for detailed dimensions

"S1/0-TP" 1/0 AWG Single wire lug, 1/0-14 AWG wire range, Multiple (dual) Class B/C wires and FLEX wire, 1-8 AWG, class G-K including mm2 class 5, single barrel, aluminum or copper wire, CU9AL, 90C temperature rating, one mounting hole with anti-rotation rib(turn prevent) , Slotted Screw, UL Listed at 600v - acceptable for use through 2000v, CSA Certified. Transformer Lug - Replace Low conducting bronze with High Conductivity Dual Rated Aluminum. 5/16" bolt. IHI® brand.

	DIY Mounting Holes™: Cat. No. S1/0 Style No. 1,5
CSA and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the S1/0-TP Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

Approved for two wire use

Dimensions

A: 1.46" (37.3mm)

B: 0.77" (19.0mm)

C: 0.64" (16.3mm)

I: 0.75" (19.1mm)

See Mechanical Drawing for detailed dimensions

"S1/0-TP-HEX" 1/0 AWG Single wire lug, 1/0-14 AWG wire range, Multiple (dual) Class B/C wires and FLEX wire, 1-8 AWG, class G-K including mm2 class 5, single barrel, aluminum or copper wire, CU9AL, 90C temperature rating, one mounting hole with anti-rotation rib(turn prevent) , Hex Socket Steel Screw, UL Listed at 600v - acceptable for use through 2000v, CSA Certified. Transformer Lug - Replace Low conducting bronze with High Conductivity Dual Rated Aluminum. 5/16" bolt. IHI® brand.

	DIY Mounting Holes™: Cat. No. S1/0 Style No. 1,5
CSA and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the S1/0-TP-HEX Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

Approved for two wire use

Dimensions

A: 1.06" (26.9mm)

B: 0.98" (24.9mm)

C: 0.96" (24.4mm)

I: 0.62" (15.8mm)

See Mechanical Drawing for detailed dimensions

"S1/0-TP2-W-HEX" 1/0 AWG Single wire lug, 1/0-14 AWG wire range, Multiple (dual) Class B/C wires and FLEX wire, 1-8 AWG, class G-K including mm2 class 5, single barrel, aluminum or copper wire, CU9AL, 90C temperature rating, one M8 x 1.25 mounting hole (recommended mounting bolt: M8 x 1.25 X 16mm long; assumes bus is 1mm minimum thickness) Anti-rotation /turn prevent rib, Hex socket screw, UL Listed at 600v - acceptable for use through 2000v, CSA Certified. IHI® brand.

UL & CSA Approved for Multiple Wires 2X #14 to 2X #6 and FLEX wire Class G-K sizes #1-#8 AWG
Use of Ferrules (UL Listed) on wires 1-8 AWG

	DIY Mounting Holes™: Cat. No. S1/0 Style No. 1,5
CSA and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the S1/0-TP2-W-HEX Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

Assembly PDF

Dual/Interlocking Lugs

Three Wire Application

2S2/0 and S2/0

Hardware not included.

Lugs sold individually.

Dimensions

A: 1.47" (37.3mm)

B: 0.81" (20.6mm)

C: 0.63" (15.9mm)

See Mechanical Drawing for detailed dimensions

"S2/0" 2/0 AWG Single wire lug, 2/0-14 AWG wire range, and FLEX wire, 1/0-14 AWG, class G-K including mm2 class 5, single barrel, aluminum or copper wire, CU9AL, 90C temperature rating, one 1/4" mounting hole, UL Listed at 600v - acceptable for use through 2000v, CSA Certified. Shipped with regular slotted screw or TUFF SLOT™ closed slot which guides driver bit for rapid assembly (subject to availability). TUFF SLOT™ is a trademark of IHI Connectors® Stacking, nesting, and interlocking lugs permitted under UL White book ZMVV. IHI® brand. "Drop-In" Replacement for Homac A-150 and Panduit LAMA2/0-14-Q.

	DIY Mounting Holes™: Cat. No. S2/0 Style No. ALL
CSA and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the S2/0 Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

WIRE CONNECTORS AND SOLDERING LUGS (ZMVV)

INSTALLATION

Wire connectors are intended for use in installations covered by ANSI/NFPA 70, ‘‘National Electrical Code’’ (NEC), and should be installed using the prescribed manufacturer’s installation instructions.

"Stacking of connectors (multiple connectors assembled using a single bolt, nut and washers) may be permitted where mechanical interference is reduced or eliminated with the use of offset tangs, stacking adapters, and the like. The surface contact area of the mounting tang should make completecontact with the mounting surface or the previously stacked connector tang."

Ref. UL White Book ZMVV section

ZMVV UL Whitebook Installation Information

Assembly PDF

Dual/Interlocking Lugs

Three Wire Application

2S2/0 and S2/0

Hardware not included.

Lugs sold individually.

Dimensions

A: 1.47" (37.3mm)

B: 0.81" (20.6mm)

C: 0.63" (15.9mm)

See Mechanical Drawing for detailed dimensions

"S2/0-HEX" 2/0 AWG Single wire lug, 2/0-14 AWG wire range, and FLEX wire, 1/0-14 AWG, class G-K including mm2 class 5, single barrel, aluminum or copper wire, CU9AL, 90C temperature rating, one mounting hole, 3/16" A/F Hex Socket Drive screw, UL Listed at 600v - acceptable for use through 2000v, CSA Certified. 1/4" bolt mounting hole. Stacking, nesting, and interlocking lugs permitted under UL White book ZMVV. IHI® brand.

	DIY Mounting Holes™: Cat. No. S2/0 Style No. ALL
CSA and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the S2/0-HEX Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

WIRE CONNECTORS AND SOLDERING LUGS (ZMVV)

INSTALLATION

Wire connectors are intended for use in installations covered by ANSI/NFPA 70, ‘‘National Electrical Code’’ (NEC), and should be installed using the prescribed manufacturer’s installation instructions.

"Stacking of connectors (multiple connectors assembled using a single bolt, nut and washers) may be permitted where mechanical interference is reduced or eliminated with the use of offset tangs, stacking adapters, and the like. The surface contact area of the mounting tang should make completecontact with the mounting surface or the previously stacked connector tang."

Ref. UL White Book ZMVV section

ZMVV UL Whitebook Installation Information

Assembly PDF

Dual/Interlocking Lugs

Three Wire Application

2S2/0 and S2/0

Dimensions

A: 1.47" (37.3mm)

B: 0.81" (20.6mm)

C: 0.63" (15.9mm)

See Mechanical Drawing for detailed dimensions

Note!!!   This part has a 5mm hex socket for use in metric countries.

"S2/0-HEX-M" 2/0 AWG metric single wire lug, 2/0-14 AWG wire range, and FLEX wire, 1/0-14 AWG, class G-K including mm2 class 5, single barrel, aluminum or copper wire, CU9AL, 90C temperature rating, one mounting hole, METRIC 5mm Hex Socket screw, UL Listed at 600v - acceptable for use through 2000v, CSA Certified. 1/4" or 6mm bolt mounting hole. Stacking, nesting, and interlocking lugs permitted under UL White book ZMVV. IHI® brand.

	DIY Mounting Holes™: Cat. No. S2/0 Style No. ALL
CSA and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the S2/0-HEX-M Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

WIRE CONNECTORS AND SOLDERING LUGS (ZMVV)

INSTALLATION

Wire connectors are intended for use in installations covered by ANSI/NFPA 70, ‘‘National Electrical Code’’ (NEC), and should be installed using the prescribed manufacturer’s installation instructions.

"Stacking of connectors (multiple connectors assembled using a single bolt, nut and washers) may be permitted where mechanical interference is reduced or eliminated with the use of offset tangs, stacking adapters, and the like. The surface contact area of the mounting tang should make completecontact with the mounting surface or the previously stacked connector tang."

Ref. UL White Book ZMVV section

ZMVV UL Whitebook Installation Information

Dimensions

A: 1.47" (37.3mm)

B: 0.81" (20.6mm)

C: 0.63" (15.9mm)

See Mechanical Drawing for detailed dimensions

"S2/0-34-44" 2/0 AWG Single wire lug, 2/0-14 AWG wire range, and FLEX wire, 1/0-14 AWG, class G-K including mm2 class 5, single barrel, aluminum or copper wire, CU9AL, 90C temperature rating, one mounting hole, slotted set screw, UL Listed at 600v - acceptable for use through 2000v, CSA Certified. 5/16" or 8mm bolt mounting hole. IHI® brand.

	DIY Mounting Holes™: Cat. No. S2/0 Style No. ALL
CSA and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the S2/0-34-44 Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

Dimensions

A: 1.47" (37.3mm)

B: 0.81" (20.6mm)

C: 0.63" (15.9mm)

See Mechanical Drawing for detailed dimensions

"S2/0-34-44-HEX" 2/0 AWG Single wire lug, 2/0-14 AWG wire range, and FLEX wire, 1/0-14 AWG, class G-K including mm2 class 5, single barrel, aluminum or copper wire, CU9AL, 90C temperature rating, one mounting hole, 3/16" Hex Socket screw, UL Listed at 600v - acceptable for use through 2000v, CSA Certified. 5/16" or 8mm bolt mounting hole. IHI® brand.

	DIY Mounting Holes™: Cat. No. S2/0 Style No. ALL
CSA and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the S2/0-34-44-HEX Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

Dimensions

A: 1.47" (37.3mm)

B: 0.81" (20.6mm)

C: 0.63" (15.9mm)

See Mechanical Drawing for detailed dimensions

"S2/0-34-44-HEX-M" 2/0 AWG metric single wire lug, 2/0-14 AWG wire range, and FLEX wire, 1/0-14 AWG, class G-K including mm2 class 5, single barrel, aluminum or copper wire, CU9AL, 90C temperature rating, one mounting hole, METRIC 5mm Hex Socket screw, UL Listed at 600v - acceptable for use through 2000v, CSA Certified. 5/16" or 8mm bolt mounting hole. IHI® brand.

	DIY Mounting Holes™: Cat. No. S2/0 Style No. ALL
CSA and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the S2/0-34-44-HEX-M Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

Dimensions

A: 1.32" (33.5mm)

B: 0.90" (22.8mm)

C: 0.61" (15.5mm)

I: 0.41" (10.4mm)

See Mechanical Drawing

for detailed dimensions

"S2/0-TP-S-34-41-HEX" 2/0 AWG Single wire lug, 2/0-14 AWG wire range, and FLEX wire, 1/0-14 AWG, class G-K including mm2 class 5, single barrel, aluminum or copper wire, CU9AL, 90C temperature rating, one mounting hole with anti-rotation rib(turn prevent), Hex Socket Screw, UL Listed at 600v - acceptable for use through 2000v, CSA Certified. 5/16" bolt (6mm). International Hydraulics Inc.® brand. Made in USA.
UL & CSA Approved for FLEX wire Class G-K sizes & mm2 class 5 #1/0-#14 AWG
Use of Ferrules (UL Listed) on wires 1/0-14 AWG

	DIY Mounting Holes™: Cat. No. S2/0 Style No. ALL
CSA and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the S2/0-TP-S-34-41-HEX Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

Dimensions

A: 1.47" (37.3mm)

B: 0.81" (20.6mm)

C: 0.63" (15.9mm)

I: 0.44" (11.2mm)

See Mechanical Drawing for detailed dimensions

"S2/0-TP-27-44" 2/0 AWG Single wire lug, 2/0-14 AWG wire range and FLEX wire, 1/0-14 AWG, class G-K including mm2 class 5, single barrel, aluminum or copper wire, CU9AL, 90C temperature rating, one mounting hole with anti-rotation rib(turn prevent), Slotted Screw, UL Listed at 600v - acceptable for use through 2000v, CSA Certified. 1/4" bolt (6mm). International Hydraulics Inc.® brand. Made in USA.
UL & CSA Approved for FLEX wire Class G-K sizes & mm2 class 5 #1/0-#14 AWG
Use of Ferrules (UL Listed) on wires 1/0-14 AWG

Compare to OZXA-24 lug fits ABB 100Amp switches
OS100GJ OS100J OS100GGJS OESA-F100 etc.
Click here for full details pdf

	DIY Mounting Holes™: Cat. No. S2/0 Style No. ALL
CSA and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the S2/0-TP-27-44 Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

Dimensions

A: 1.47" (37.3mm)

B: 0.81" (20.6mm)

C: 0.63" (15.9mm)

I: 0.44" (11.2mm)

See Mechanical Drawing for detailed dimensions

"S2/0-TP-27-44-HEX" 2/0 AWG Single wire lug, 2/0-14 AWG wire range, and FLEX wire, 1/0-14 AWG, class G-K including mm2 class 5, single barrel, aluminum or copper wire, CU9AL, 90C temperature rating, one mounting hole with anti-rotation rib(turn prevent), 3/16" Hex Socket Screw, UL Listed at 600v - acceptable for use through 2000v, CSA Certified. 1/4" bolt (6mm). (Metric 5mm hex socket screw also available option). International Hydraulics Inc.® brand. Made in USA.

Compare to OZXA-24 lug fits ABB 100Amp switches
OS100GJ OS100J OS100GGJS OESA-F100 etc.
Click here for full details pdf

	DIY Mounting Holes™: Cat. No. S2/0 Style No. ALL
CSA and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the S2/0-TP-27-44-HEX Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

Dimensions

A: 1.47" (37.3mm)

B: 0.81" (20.6mm)

C: 0.63" (15.9mm)

I: 0.44" (11.2mm)

See Mechanical Drawing for detailed dimensions

"S2/0-TP-27-44-HEX-M" 2/0 AWG Single wire lug, 2/0-14 AWG wire range, and FLEX wire, 1/0-14 AWG, class G-K including mm2 class 5, single barrel, aluminum or copper wire, CU9AL, 90C temperature rating, one mounting hole with anti-rotation rib(turn prevent), 5mm metric hex Socket Screw, UL Listed at 600v - acceptable for use through 2000v, CSA Certified. 1/4" bolt (6mm). International Hydraulics Inc.® brand. Made in USA.

Compare to OZXA-24 lug fits ABB 100Amp switches
OS100GJ OS100J OS100GGJS OESA-F100 etc.
Click here for full details pdf

	DIY Mounting Holes™: Cat. No. S2/0 Style No. ALL
CSA and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the S2/0-TP-27-44-HEX Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

Dimensions

A: 1.47" (37.3mm)

B: 0.81" (20.6mm)

C: 0.63" (15.9mm)

I: 0.51" (13.0mm)

See Mechanical Drawing

for detailed dimensions

Dimensions

A: 1.47" (37.3mm)

B: 0.81" (20.6mm)

C: 0.79" (20.0mm)

I: 0.49" (12.4mm)

See Mechanical Drawing for detailed dimensions

"S2/0-TP-W2-36-49-HEX" Single wire lug 2/0-14 AWG wire range, and FLEX wire, 1/0-14 AWG, class G-K including mm2 class 5, single barrel, aluminum or copper wire, AL9CU, 90C temperature rating, one mounting hole, Hex Socket screw, 5/16" bolt mounting hole. UL Listed at 600v - acceptable for use through 2000v, CSA Certified. IHI® brand.

UL & CSA Approved for FLEX wire Class G-K sizes & mm2 class 5 #1/0-#14 AWG
Use of Ferrules (UL Listed) on wires 1/0-14 AWG

	DIY Mounting Holes™: Cat. No. S2/0 Style No. ALL
CSA and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the S2/0-TP-W2-36-49-HEX Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

Dimensions

A: 1.47" (37.3mm)

B: 0.81" (20.6mm)

C: 0.98" (24.9mm)

I: 0.49" (12.4mm)

See Mechanical Drawing for detailed dimensions

"S2/0-TP-W-44-49-HEX" 2/0 AWG Single wire lug, 2/0-14 AWG wire range, and FLEX wire, 1/0-14 AWG, class G-K including mm2 class 5, single barrel, aluminum or copper wire, AL9CU, 90C temperature rating, one mounting hole, Hex Socket screw, UL Listed at 600v - acceptable for use through 2000v, CSA Certified. 3/8" bolt mounting hole. IHI® brand.

UL & CSA Approved for FLEX wire Class G-K sizes & mm2 class 5 #1/0-#14 AWG
Use of Ferrules (UL Listed) on wires 1/0-14 AWG

	DIY Mounting Holes™: Cat. No. S2/0 Style No. ALL
CSA and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the S2/0-TP-W-44-49-HEX Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

Dimensions

A: 1.74" (44.2mm)

B: 0.81" (20.6mm)

C: 0.63" 16.0mm)

I: 0.49" (12.4mm)

See Mechanical Drawing

for detailed dimensions

"S2/0-TP-W-44-49-HEX" 2/0 AWG Single wire lug, 2/0-14 AWG wire range, andFLEX wire, 1/0-14 AWG, class G-K including mm2 class 5, single barrel, aluminum or copper wire, CU9AL, 90C temperature rating, one mounting hole with anti-rotation rib (turn prevent), 3/16" Hex Socket Screw, UL Listed at 600v - acceptable for use through 2000v, Canada Certified. 5/16" bolt. International Hydraulics Inc® brand. Made in the USA from domestic and imported parts.

	DIY Mounting Holes™: Cat. No. S2/0 Style No. ALL
CSA and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the S2/0-TPEX-36-49-HEX Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

Dimensions

A: 1.74" (44.2mm)

B: 0.81" (20.6mm)

C: 0.98" (24.9mm)

I: 0.53" (13.5mm)

See Mechanical Drawing

for detailed dimensions

"S2/0-TPEX-44-53-HEX" 2/0 AWG Single wire lug, 2/0-14 AWG wire range, and FLEX, AWG 1/0-14, wire class G-K including mm2 class 5, single barrel, aluminum or copper wire, CU9AL, 90C temperature rating, one mounting hole with anti-rotation rib (turn prevent), 1/4" Hex Socket Screw, UL Listed at 600v - acceptable for use through 2000v, Canada Certified. 3/8" bolt. International Hydraulics Inc® brand. Made in the USA from domestic and imported parts.

	DIY Mounting Holes™: Cat. No. S2/0 Style No. ALL
Canada and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the S2/0-TPEX-44-53-HEX Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

Dimensions

A: 1.62" (41.1mm)

B: 0.75" (19.1mm)

C: 0.61" (15.5mm)

L: 0.5" (12.7mm)

See Mechanical Drawing for detailed dimensions

"4444" 2/0 AWG Single wire lug, 2/0-14 AWG wire range , OEM style with two mounting holes, one threaded, one clearance drilled. Dual rated, single barrel, aluminum or copper wire, CU7AL, 75C temperature rating. UL Recognized at 600v - acceptable for use through 2000v. (Not Listed for General Use and not CSA Certified.)IHI® brand.